part3-23

3.11.13 
Employment Tax Returns

All Official Use Only content has been replaced with ≡.

3.11.13.1 
(01-01-2009)
General Purpose of Document Perfection

  1. The purpose of Document Perfection is to code and edit (perfect) returns and other documents for input to the Master File
    through the Integrated Submission and Remittance Processing System (ISRP) or the Service Center Recognition Image Processing
    System (SCRIPS). In addition, Document Perfection forwards any other documents or attachments not related to the processing
    of the returns to the function responsible for handling them.

  2. Document Perfection is not responsible for checking the validity of the documents being processed. The computer will perform
    these functions after the returns and other documents are coded and edited as prescribed in this Section.

3.11.13.2 
(01-01-2009)
Purpose of Section

  1. This section provides processing instructions for Forms 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945
    and CT-1 employment tax returns and their related documents.

  2. The instructions in the specific sections will take precedence over the general section in the case of a conflict of instructions.

  3. This section is intended as a combination working and training manual.

3.11.13.2.1 
(01-01-2009)
♦BMF Consistency♦

  1. The purpose of the Business Master File(BMF) Consistency initiative is to achieve consistency in the BMF Code & Edit processing
    IRMs.

  2. Topics for BMF Consistency have been identified and developed as a coordinated effort between Cincinnati, Ogden, and W&I (BMF
    Policies, Procedures and Guidance Branch).

  3. BMF Consistency Subsections are identified by a diamond (♦) symbol before and after the Subsection title.

  4. The text in normal print within a consistency Subsection signifies the common process to be used for all BMF returns. The
    text in bold print is form-specific and applies to this IRM only.

3.11.13.3 
(01-01-2009)
Scope

  1. These instructions apply to Employment Tax Returns which will be processed through the Service Center Image Processing System
    (SCRIPS) or Integrated Submission and Remittance Processing (ISRP) and will interface with the Error Resolution System (ERS).

  2. The documents to be processed based on the instructions in this chapter are:

    • Forms 941, 941-PR, and 941-SS, Employers QUARTERLY Federal Taxes Return.

    • Form 941-M, Employers Monthly Federal Tax Return (e.g. monthly reporting to be consolidated at the end of a quarter on Form
      941.,

    • Form 941c, Supporting Statement to Correct Information.

    • Forms 943 and 943 PR, Employers Annual Tax Return for Agricultural Employees.

    • Form 944, 944-PR, 944(SP) and 944-SS, Employers ANNUAL Federal Tax Return.

    • Form 945, Annual Return of Withheld Federal Income Tax.

    • Form CT-1, Employers Annual Railroad Retirement Tax Return.

3.11.13.4 
(01-01-2009)
Local Desk Procedures

  1. Some Submission Processing Campuses have developed local use Desk Procedures.

  2. Such procedures are only to be used:

    • To supplement existing Headquarters procedures,

    • To expand Submission Processing Campus Returns and Documents Analysis procedures by incorporating material for other IRMs,
      ADP handbooks, etc.,

    • For local routing procedures, and

    • Are not limited to the examples listed.

  3. Unit managers must have a signed approval on file from the responsible Operations Manager on all Submission Processing Campus
    Desk Procedures.

  4. All existing local information and procedures issuance should be reviewed by the Operations Manager upon receipt of the new
    IRM revision to ensure conformance with Headquarters procedures.

3.11.13.5 
(01-01-2009)
Unprocessable Conditions

  1. A return must contain specific items before it is considered processable. Perfect all documents to the extent possible from
    schedules and other attachments. The specific items needed are:

    • An Employer Identification Number (EIN)

    • A legible name (for name control)

    • A valid tax period

    • Legible tax data, if tax liability is indicated

    • A signature attesting to the perjury statement “Jurat”
      shown on the document

  2. Conditions which make a document unprocessable are:

    • Name so illegible or incomplete that the name control cannot be determined.

    • Employer Identification Number (EIN) is other than 9 numeric digits which cannot be perfected from information on the return
      or attachment.

    • The document has two or more different EINs.

    • Taxpayer has stated on the document or attachment that he/she has combined liability for more than one tax period, or more
      than one type of tax.

      Exception:

      Religious orders can report up to 20 calendar quarters on one return (See Publication 517). Furthermore, Section 218 agreement
      filers can report retroactive coverage back to the first day of the fifth calendar year preceding the year in which the Section
      218 agreement modification is sent to the Commissioner of Social Security. For example, if a modification is sent to the Commissioner
      in 2007 , it can establish coverage back to 2002.

    • Tax data entries on the document are so incomplete, illegible or contradictory that the tax liability cannot be determined.

    • The document has been mis-blocked.

    • Any condition set forth as unprocessable in the sections on processing specific documents.

    • The return is unsigned or signed in the wrong location.

    • The return has only entity data and no other statements, attachments or signature by the taxpayer.

    • The return is for a tax period earlier than the ADP date or later than the current return being processed. The first valid
      period ending – Form 941 – 196203, Form 943 – 196112, Form 944 – 200612 and Form CT-1 – 196203.

  3. Processing Unprocessable Documents when perfection is not possible -On a return with multiple EINs or an illegible name, take the following action:

    1. If the return is a numbered document, Asterisk (*) to the left and line through any multiple/partial EIN(s). The record will automatically be placed on the Error Inventory of ERS to be researched on the
      Key Index File (KIF). If an illegible name is present, edit AC 320 or 352 on the return and prepare Form 4227 and notate “EIN
      research”
      for Entity research action.

    2. If the return is unnumbered, request IDRS research. If unable to locate, prepare Form 4227 with notation of “EIN research”
      and send to Entity.

    3. If the document is unnumbered and the EIN is missing, applied for, pending, etc., send for research per IDRS. If unable to
      locate EIN, prepare Form 4227 with notation of “EIN research”
      and sent to Entity.

    4. On a return where multiple tax periods or tax liability are involved and a Form CP 51X is attached, input TC 599 cc18 for
      the tax period shown on the Form CP 51X. Follow the applicable instructions in the IRM 3.11.13 for processing the return.

    IF AND THEN
    The taxpayers EIN or name cannot be determined from the attachments, or after research procedures, The return cannot be returned to the taxpayer due to the illegible entry data, Numbered Returns-
    Step 1 – Enter Action Code 610 (non-remit) or 611 (remit).
    Step 2 – Prepare a Form 4227 indicating to the Rejects unit to void the DLN and properly dispose of the return in accordance with
    IRM 1.15.20, Records Control Schedule for Administration/Organization Support Operational Records.
    Unnumbered Returns-
    Pull the return from the batch and give it to your lead tax examiner or supervisor for disposition in accordance with IRM
    1.15.20.

  4. DO NOT send the following unprocessable returns to the “Hold File”
    :

    Note:

    Local procedures determine where the “Hold File”
    will be maintained.

    • Refund returns that receive an insufficient taxpayers reply to make them processable or that receive no reply from the taxpayer.
      Enter Computer Condition Code “X”
      . However, if the only tax data entries are FTD credits or liabilities, or balance due/overpayment amounts, ≡ ≡ ≡ ≡ ≡ ≡
      ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
      ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • Returns bearing TC 59X in the left margin, Sec. 6020(b) designation or any other return secured or prepared by a Compliance
      (Collection) activity.

    • Returns which are void of entity data and signature. If the only entries are figures, give the return to your supervisor for
      an administrative determination. Likewise, if there is an illegible signature on this type of return where even the first
      alpha letter of the last name cannot be determined, give it to your supervisor.

  5. All Other Unprocessable Conditions - Initiate correspondence or send the return back to the taxpayer on Form 6800-A or Notice 695 where applicable, unless other
    instructions are given in the IRM.

3.11.13.6 
(01-01-2009)
♦Correspondence♦

  1. There are unprocessable conditions that require corresponding with the taxpayer to resolve.

  2. Do not correspond or send back returns prepared by Compliance (6020(b) and SFR).

  3. Do not send back returns when corresponding on those secured by Compliance (notation such as “Process as original”
    , TC 59X, ICS, etc.).

  4. When you are corresponding, first examine the return so that all of the conditions can be included in the same correspondence.
    If additional information is needed, the second correspondence must include a paragraph of apology for any inconvenience.
    On all correspondence to taxpayers, put the EIN on form letters or notices. (See “Exception”
    below for Form 6800-A).

    Note:

    Do not correspond for missing information (e.g. missing signature, schedules or forms) on “CIS”
    reprocessable returns with Form 13596 or 3893 attached. Route “CIS”
    reprocessable returns to Accounts Management. See IRM 3.11.13.33

    • Notice 695 – Request for Missing Signature to Complete Return, is used to mail a timely filed refund return back to the taxpayer to request a signature only.

      Note:

      Do not use Notice 695 if the return is delinquent, or a secured return (e.g. see IRM 3.11.13.6, Correspondence).

    • Form 3696 – Correspondence Action Sheet, is used to correspond on numbered returns, unnumbered balance due returns and secured
      returns.

      Note:

      It is now acceptable to receive missing signature, schedules, etc. via fax. Be sure to include the letter paragraph advising
      the taxpayer of this option when completing Form 3696.

    • Form 13195 – 941/943/944/945/CT-1 Correspondence Action Sheet, or a local equivalent of Form 13195, is used to correspond
      on numbered returns and unnumbered other than timely refund or zero balance returns. See Figure 3.11.13-1.
      - On Form 13195, place a mark (such as a check) next to the appropriate Paragraph Code representing the correspondence issue,
      edit the proper paragraph(s) shown on the 21C letter for any additional correspondence issues in proper sequential order in
      the empty spaces. If fill-in information is required by the chosen paragraph, it is also edited to the Form 13195. See Figure
      3.11.13-3

      - On return (Paperless Correspondence), edit Action Code 211 followed by a dash (-), then the appropriate Selective Paragraph
      Codes from Form 13195 and any additional paragraph(s) shown on the 21C letter representing the correspondence issue. See Figure
      3.11.13-6

    • Form 6800-A – Request for Missing Information or Papers to Complete Return, is used to mail a timely filed refund and “zero-balance”
      return back to the taxpayer to secure additional information. Use Form 6800-A for unnumbered refund or zero-balance returns
      if, correspondence requires a response.

      Note:

      Do not use Form 6800-A if the return is delinquent, or a Secured Return (e.g. see IRM 3.11.13.6, Correspondence Action).

      Exception:

      If a return showing an EIN in the correct format (e.g. xx-xxxxxxx) is being attached to Form 6800-A, DO NOT EDIT the EIN to
      the top of Form 6800-A.

    Figure 3.11.13-1

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 13195 941/943/944/945/CT-1 Correspondence Action Sheet

    Forms 941, 943, 944, 945 and CT-1
    IF AND THEN
    Unnumbered refund or Zero-Balance returns, Correspondence requires a response, Step 1- Correspond using Form 6800-A. See Figure 3.11.13-2.

    Exception:

    Do not use Form 6800-A if the return is delinquent.

    Step 2 – Check the appropriate boxes on Form 6800-A to indicate the reason for the return being sent back.
    Step 3 – Remove any internal documents.
    Step 4 – If present, circle all Received Dates on the return.
    Step 5 – Attach Form 6800-A below the Entity area.
    Step 6 – Remove from batch and forward to Correspondence function for mailing.

    Figure 3.11.13-2

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Corresponding Using Form 6800-A

    Forms 941, 943, 944, 945 and CT-1:
    IF AND THEN
    Balance Due Returns, The correspondence is for signature only, Step 1 – Edit Action Code “225″
    (Correspondence for Signature only) or “226″
    (International Correspondence for Signature only) on the return.
    Step 2 – Continue editing the return.
    Step 3 – Leave the return in the batch.
    The correspondence is for other than signature only, Step 1 – Edit Action Code “211″
    (First Correspondence).
    Step 2 – Use the 21C letter to determine the appropriate paragraph(s).
    Step 3 – Edit a dash and the number of the 21C letter to the right of the Action Code.

    Example:

    To correspond for the “Final date of wages”
    , we would edit “211–1″
    . To correspond for both the “Final date of wages”
    and missing signature, we would edit “211-1Zi”
    .

    Step 4 – Continue editing the return.
    Step 5 – Leave the return in the batch.

    Note:

    Do not correspond for a signature on “CIS”
    reprocessable returns, route to Accounts management. See IRM 3.11.13.33 (Correspondence Imaging System) for processing
    Instructions.

    Forms 941, 943, 944, 945 and CT-1:
    IF AND THEN
    Numbered and Unnumbered Balance Due returns, Correspondence requires a response, Step 1 – Complete Form 13195 , or local equivalent, indicating the letter number (21C, 86C, 100C, 854C, 1382C, 1355C, etc.), MFT,
    number of copies and the appropriate paragraphs.
    Remember: Within these paragraphs, there may be Fill-ins that the tax examiner will be required to enter, such as, tax period, form
    number, DLN, etc.

    Note:

    It is now acceptable to receive a missing signature, forms, etc. by fax. Be sure to include the letter paragraph advising
    the taxpayer of this option when completing Form 13195, or the local equivalent to Form 13195.

    Step 2 – Attach Form 13195, or the local equivalent of Form 13195, to the front of the return below the entity area.
    Step 3- Edit Action Code “211″
    (First Correspondence) , “225″
    (Correspondence for Signature only), or (for OSC only), “226″
    (International Correspondence for Signature only) on the return. See Figure 3.11.13-3.
    Step 4 – Continue editing the return.
    Step 5 – Leave the return in the batch.

    Figure 3.11.13-3

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Numbered Return Requiring Correspondence – Edit Action Code

    Form 941, 943, 944, 945 and CT-1 only:
    IF AND THEN
    Numbered and Unnumbered Balance Due returns, Correspondence does not require a response, Step 1 – Complete Form 13195 , or the local equivalent to Form 13195, indicating the letter number (21C, 86C, 100C, 854C, 1355C,
    1382C, etc.), MFT, number of copies and the appropriate paragraphs.
    Step 2 – Photocopy the return and attach Form 13195 to the front of the return below the Entity area.
    Step 3 – Forward the copy to the Correspondence area.
    Step 4 – Edit an Action Trail (e.g.: “21C Sent”
    ) in the lower left corner going vertically up the side of the return.
    Step 5 – Finish editing the return and leave in batch.
    Step 6 – Continue processing.

  5. When the taxpayer responds to the correspondence, edit as follows:

    IF THEN
    Reply is received, Process based on the information provided.
    Note : If Form 6800-A is used on multiple returns, notate “CORR SENT”
    on the action/working trail when reply is received.     .
    Caution:When a signed jurat (declaration) is received, associate it to the return.

    Note:

    SCRIPS ONLY: Edit an Asterisk (*) in the left most position of the “Sign your name here”
    box.

  6. If there is no reply, the correspondence was undeliverable, or the reply is incomplete or does not address the original condition:

    IF THEN
    The return is claiming a refund, Step 1 – Edit CCC “3″
    and CCC “X”
    .
    Step 2 – Continue to process.
    The return is not claiming a refund, Step 1 – Edit CCC “3″
    .
    Step 2 – Continue to process.

    Note:

    SCRIPS ONLY: When corresponding for signature and the correspondence is returned Undeliverable, No Reply, or Reply with signed
    correspondence. Edit an Asterisk (*) in the left most position of the “Sign your name here”
    box.

3.11.13.7 
(01-01-2009)
Fact of Filing-TC 59X

  1. Whenever an unnumbered return is withdrawn from the work flow for correspondence, input TC 599 cc 17 no later than three weeks
    before the Program Completion Date. This will alter the normal delinquency check.

    1. The Form(s) 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945, and CT-1 Program Completion Dates (PCD) are
      shown in IRM 3.30.123, Processing Timeliness: Cycles, Criteria, and Critical Dates.

  2. Edit the transaction and closing code input on the left margin of the return. The codes to be entered are as follows:

    1. TC 599-cc17 – Unprocessable tax return (timely).

    2. TC 599-cc18 – Return in progress on or after the Program Completion Date (PCD), e.g. untimely.

    Exception:

    These instructions do not apply if the return is being sent back to the taxpayer.

  3. Whenever a numbered return requires correspondence, an Error Resolution System Action Code is entered. A fact of filing is
    automatically entered on IDRS; therefore, a TC 599 is not necessary.

  4. On any return with a Form CP 51X attached, input a TC 599-cc18 for the tax period shown on the Form CP 51X.

3.11.13.8 
(01-01-2009)
Section 3705(a) – IRS Employee Contacts

  1. The Internal Revenue Service Restructuring and Reform Act of 1998, Section 3705 provides identification requirements for all
    IRS employees working tax related matters. IRS employees are required to give their name and unique identification number
    during taxpayer telephone, face to face, and written contact. In addition, a telephone number is required on all taxpayer
    correspondence. This will provide taxpayers with enough information to identify an IRS employee who has previously assisted
    with tax related matters.

  2. All IRS employees, in the field, national and regional offices, who communicate by telephone, correspondence, or face to face,
    with taxpayers or personal representatives on tax matters are required to provide (at a minimum) the following information:

    1. Telephone Contact: Their title, their last name, and their badge identification (ID card) number.

    2. Face to Face Contact: Their title (e.g., Mr., Mrs., Ms., Miss) provided as appropriate, their last name, and their badge identification
      (ID card) number.

    3. Correspondence: All correspondence must include a telephone number where the taxpayers question can be answered. In addition,
      manually generated and handwritten correspondence must include their title (e.g. Mr., Mrs., Ms., Miss), their last name, and
      their IDRS, letter system, or badge identification (ID card) number.

    4. The IDRS number and numbers for some other letter systems are automatically generated. If it is not generated, or a handwritten
      note is prepared, the badge identification (ID card) number must be used. Toll-free employees may also provide their location
      for identification purposes. Faxes to taxpayers on tax related matters are considered manually-generated correspondence and
      must include the required information.

    5. Correspondence, whether sent directly to the taxpayer or to the taxpayers personal representative, must contain the required
      information.

    6. When a taxpayer insists on speaking with a specific employee who previously handled their request or inquiry, or complains
      about the level of service previously provided, every attempt should be made to resolve the taxpayers inquiry. If the issue
      cannot be resolved, the employee should refer the inquiry using established procedures to his or her manager.

    7. Correspondex letters will require a specific employee name and telephone number only if the employee initiating the correspondence
      is in the best position to respond to any questions that the taxpayer may have about the correspondence, or the employee is
      asking the taxpayer to provide additional case-related information.

    8. Otherwise, if the taxpayer does not need to contact a specific employee, the correspondence needs only an IRS telephone number
      and standard signature.

    9. Secretaries, receptionists or other people who answer the telephone in functional offices need to identify themselves by providing
      their badge identification (ID card) number only if they are answering telephones which are routinely used to provide tax
      or account information.

    10. It is not necessary to repeat the ID card (badge) number on a subsequent contact, when the nature of an employees work involves
      multiple contacts with the same taxpayer, and the employee has given the taxpayer, (either by telephone or in person), their
      ID card (badge) number on the first contact.

    11. However, the ID Card number must be provided tot he taxpayer upon request.

  3. During a taxpayer contact:

    IF AND THEN
    • It appears that there may be a hardship situation,
    • The taxpayer asks to be referred to the Taxpayer Advocate Service (TAS), or
    • The contact meets TAS criteria,     		You cans resolve the taxpayers issue the same day (See (4) below), Prepare and forward Form 911, Request for Taxpayer Advocate Service Assistance (And Application for Taxpayer Assistance Order
    (ATAO)), to the Local Taxpayer Advocate (See IRM 13.1.7, Taxpayer Advocate Service).

  4. If you are able to resolve and close the TAS issue on the same day as the taxpayer contact, do not refer the inquiry to TAS.
    The definition of “same day”
    is within 24 hours. There will be times you can resolve the issue completely within 24 hours. There will be times you
    cannot resolve the taxpayer issue completely within 24 hours but have taken steps within 24 hours to resolve the issue, these
    cases meet the definition of “same day”
    also. Do not refer these cases to TAS unless the taxpayer asks to be transferred to TAS. Refer to IRM 13.1.7.4, Same-Day
    Resolution by Operations. When referring cases to TAS, use Form 911 or Form e-911.

3.11.13.9 
(01-01-2009)
♦Attachments to Documents♦

  1. All attachments to the return must be reviewed before the return can be considered processable.

    1. Attachments should only be detached when specifically instructed.

    2. Edit Action Trail(s) (e.g. “2848 detached”
      ) in the lower left margin going vertically up the side of the return.

    Note:

    When a document is detached and routed for processing edit the name, address and EIN, if not already present. Also, edit the
    Return Received Date (e.g. “Recd MM/DD/YY”
    ) in the lower left margin of the detached document before routing.

  2. For all Form 941 returns Code and Edit must insure the taxpayers EIN is on all attachments, in case they are separated from
    the return during processing. If the EIN is not shown on an attachment, (to be processed with the return), edit the last 4
    digits of the taxpayers EIN. Routed attachments should show the Name, full EIN, and a Received Date.

  3. Imperfect Form 941 (Rev 2005 and subsequent) – After detaching a document from the return, and only page(s) 1, 2, and (if
    applicable) Schedule B remain; Do not pull the return, leave in “Imperfect”
    batch.

  4. Follow the general guidelines below written for each attachment:

    Note:

    If there is an indication on the document that it is not an original, such as “copy”
    etc., process as a copy and detach as necessary.

    DOCUMENT DETACH ? ACTION
    CP 207, Proposed FTD Penalty Request for Correct ROFT Information, NO If the tax period on the return and the CP 207 are the same, send both (return and CP 207) directly to Accounts Management.
    (Do not process the return).
    YES If the tax period on the return and the CP 207 are different, process the return and send the CP 207 and a copy of the return
    to Accounts Management.
    CP 267, Overpaid, No Math Error Credit Offset Notice, YES Route to Accounts Management.
    CP 259, 515-518, NO Route notice and return to Collections.

    Exception:

    DO NOT route when there is a notation of “599″
    on the return.

    General Power of Attorney, submitted on any document other than Form 2848 or 8821, NO Take No Action, Leave the Power of Attorney attached to the return. Do not route to the CAF function.
    See Form 2848 and 8821.
    Multiple Types of tax, NO Route to Rejects.
    Multiple Tax Periods, NO See IRM 3.11.13.13.4.
    Other Tax Returns (original signature), YES 1. Edit a received date to the detached return.
    2. Route to the appropriate function unless specifically directed otherwise.

    Exception:

    Returns attached to a consolidated return will NOT be detached.
    State Tax Returns, original or copy with original signature, YES Route to Receipt and Control.
    Statement establishing Reasonable Cause for delinquent filing, NO Send 1382C letter, which will inform the taxpayer of the proper procedure to follow to request abatement, if, and when a penalty
    is assessed.
    Remittance found, NO Immediately hand carry return and remittance to supervisor.
    Request for information or inquiries, YES Step 1 – Photocopy the attachment if it contains any data necessary to continue processing the return.
    Step 2 – Attach the copy to the return.
    Step 3 – Route original attachment to the proper office for necessary action.
    Request for adjustment to another document, YES Route to appropriate function. Attachment must contain (or enter if missing):
    • Name,
    • Address,
    •EIN, and
    •Received Date.
    Request for money transfer, YES •If the taxpayer notates transfer of money to the return you are processing:
    Step 1 – Prepare Form 3465 to route the request to Accounts Management.
    Step 2 – Hold the return for 2 cycles before processing.
    •If the taxpayer notates transfer of money from the return you are processing:
    Step 1 – Prepare Form 3465 to route the request to Accounts Management.
    Step 2 – Edit CCC “X”
    to freeze overpayment.
    Step 3 – Continue processing return.
    Request for Form 8109 B, Deposit Slips, or Form 8109 Coupon Books, YES Route request to Entity on Form 4417-A.
    Taxpayer Request within Correspondence for Form(s), Schedule(s), or Publication(s), NO • For current year Form(s), Schedule(s), or Publication(s):
    Step 1 – Prepare Form 4190.
    Step 2 – Forward to Forms Distribution Center for processing.
    • For prior year Form(s), Schedule(s), or Publication(s):
    Step 1 – Prepare Form 6112.
    Step 2 – Forward to Forms Distribution Center for Processing.
    Note: Forms 4190 and 6112 are generally used for IMF requests. Therefore, enter all BMF requests for forms and/or schedules
    in the “WRITE-IN”
    portions of the form.

    Note:

    Refer to CCC “P”
    procedures when the taxpayer is requesting a tax package for the form being filed.

  5. The table below contains routing instructions for specific forms or documents attached to an Employment return:

    DOCUMENT/FORM DETACH ? ACTION
    CT-1 X, Adjusted Employers Annual railroad Retirement Tax Return or Claim for Refund,   See IRM 3.11.13.18 for verification and detaching procedures.
    SS-4, Application for Employer Identification Number (Entity Control assigned an EIN to the SS-4), YES Route to Entity Control.
    SS-4, Application for Employer Identification Number (Entity Control has not assigned an EIN to the SS-4), NO Route Form SS-4 and return to Entity Control for EIN assignment.
    SS-16, Certificate of Elections of Coverage under FICA, NO •Original attached to Form 941 – Route with return to Entity Control.
    •Copy attached to Form 941 – Process return with attachment.
    W-2, Wage and Tax Statement (any originals or copies), YES Route to Receipt and Control.
    W-3, Transmittal of Wage and Tax Statement (any originals or copies), YES Route to Receipt and Control.
    W-4, Employers Withholding Allowance Certificate, NO Leave it attached. No action is required.
    843, Claim for Refund and Request for Abatement, YES Route to Accounts Management if the tax period shown on the Form 843 is different than the returns tax period. Enter Received
    Date, and EIN.
    911, Request for Taxpayer Advocate Service Assistance (And Application for Taxpayer Assistance Order), YES Forward to Taxpayer Advocate Service (TAS).
    940Schedule A, Multi-State Employer and Credit Reduction Information, NO “/”
    (line through) the Form 940 Schedule A to indicate non-transcribable with Form 941.
    Schedule B, Form 941 – Loose (not attached),   Route to Accounts Management.
    Schedule D, Form 941, YES Route to CSC CAWR Function.
    Schedule R, Form 941, Allocation Schedule for Aggregate Form 941 Filers, NO Take No Action, Back-up documentation for Form 941.
    941c, Supporting Statement To Correct Information,   See IRM 3.11.13.17 for specific processing procedures.
    941-M, Employers MONTHLY Federal Tax Return, NO Leave Attached, Back-up documentation for Form 941. See IRM 3.11.13.21 for Form 941-M processing.
    941-X, 941-PR X,Adjusted Employers QUARTERLY Federal Tax Return or Claim for Refund,   See IRM 3.11.13.18 for verification and detaching procedures.
    943-X, 943-PR X, Adjusted Employers Annual Federal Tax Return for Agricultural Employees or Claim for Refund,   See IRM 3.11.13.18 for verification and detaching procedures.
    944-X, 944-PR X, 944 (SP) X, Adjusted Employers ANNUAL Federal Tax Return or Claim for Refund,   See IRM 3.11.13.18 for verification and detaching procedures.
    945-X, Adjusted Annual Return of Withheld Federal Income Tax or Claim for Refund,   See IRM 3.11.13.18 for verification and detaching procedures.
    1096, Annual Summary and Transmittal of U.S. Information Returns, YES Route to Receipt and Control.
    1099, (any originals), YES Route to Receipt and Control.
    1331, Notice of Adjustment, YES Route to Accounts Management.
    2275, Record Request, Charge and Recharge, NO Take no action.
    2678, Employer/Payer Appointment of Agent, YES Route to Entity for processing.
    2848, Power of Attorney and Declaration of Representative, YES Step 1 – Detach Form 2848 from the return.
    Step 2 – Edit taxpayers name and EIN on Form 2848, if missing.
    Step 3 – Edit the received date on the Form 2848.
    Step 4 – Route Form 2848 to CAF function.
    Step 5 – Edit action trail on tax return.
    2859, Request for Quick or Prompt Assessment, NO Reject. Hand-Carry to Accounting (NMF) or follow local procedures.
    3198, Special Handling Notice of Examination Case Processing, NO Take no action.
    3244, Payment Posting Voucher, YES Route to Receipt and Control.
    3753, Manual Refund Posting Voucher, NO Step 1 – Research to determine if TC 840 has posted.
    Step 2 – See IRM 3.11.13.12.2 for CCC “O”
    procedures.
    3870, Request for Adjustment, YES Route to Accounts Management.
    3893, Re-Entry Document Control, NO See IRM 3.11.13.29 for processing procedures.
    4029, Application for Exemption From Social Security and Medicare Taxes and Waiver of Benefits, YES Send to:

    Social Security Administration,
    Security Records Center,
    Attn: Religious Exemption Unit,
    P.O. Box 7
    Boyers, PA 16020.
    4219, Statement of Liability of Lender, Surety, or Other Person for Withholding Taxes, YES Route to Compliance (Examination).
    5604, Section 6020(b) Action Sheet, NO No Action, Support for 6020(b) return.
    8109-C, FTD Address Change, YES Route to Entity function.
    8274, Certification by Churches and Qualified Church-Controlled Organizations Electing Exemption from Employer Social Security
    and Medicare Taxes,     		YES Route to:


    Ogden Submission Processing Campus
    Entity Control
    Ogden, UT 84201-0027.
    8275-R, Regulation Disclosure Statement, YES Route to Compliance (Examination) – process return.
    8300, Report of Cash Payments Over $10,000 Received in a Trade or Business, YES Route to:


    Detroit Computing Center
    PO Box 32621
    Detroit, Michigan 48232.
    8655, Reporting Agent Authorization, YES Route to:
    Accounts Management Service Campus,
    MS 6748 RAF TEAM,
    1973 North Rulon White Blvd.
    Ogden, UT 84404.
    8821, Tax Information Authorization, YES Step 1 – Detach Form 8821 from the return.
    Step 2 – Edit taxpayers name and EIN on Form 8821, if missing.
    Step 3 – Edit the received date on the Form 8821.
    Step 4 – Route Form 8821 to CAF function.
    Step 5 – Edit action trail on tax return.
    8822, Change of Address,   • If the address is same as return caption – take no action.
    • If address is different – detach and route to Entity Control.


    Note: If detached from a return, compare the return address with the address on Form 8822. If different, edit the new address
    to the return(s).
    9465, Installment Agreement Request, or letter substitute, YES Route Form 9465, Installment Agreement, or a letter substitute to Compliance.
    9779, EFTPS Business Enrollment Form, YES Send to:


    EFTPS Enrollment Processing Center
    PO Box 173788
    Denver, CO 80217-3788.

3.11.13.10 
(01-01-2009)
Disposition of Documents

  1. Blocked and numbered documents that have been coded and edited should be routed to Data Conversion for transcribing.

  2. Documents not blocked and numbered that have been coded and edited should be transmitted to the Document Perfection function
    for blocking and numbering.

  3. Documents should be withdrawn from processing:

    IF THEN
    Leaving the Submission Processing Campus, Transmit to Receipt and Control for shipment.
    Not leaving the Submission Processing Campus, Transmit to the appropriate function in the Submission Processing Campus for the required action.
    Note:This includes items detached from documents to be processed that require correspondence, accounting, or other action.

3.11.13.11 
(01-01-2009)
Return Editing Guidelines

  1. The following general information can be used when editing Forms 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS,
    945, and CT-1 returns.

  2. General instructions eliminate repetition of the same instructions for each return. If the general instructions and the specific
    instructions conflict, follow the specific instructions.

  3. The following criteria should be considered when editing a document:

    1. The return line format on all returns must correspond to the current quarters or years (as applicable) revision, unless
      otherwise directed. To convert a return to the current format, you may renumber the lines on the prior revision to the current
      revision.

      Note:

      Form 941 revisions dated 2004 and earlier, re-number the lines using the current revision of Form 941 and batch the returns
      to be processed through ISRP.

    2. Edit all money fields as DOLLARS and CENTS, unless otherwise directed. Editing is not required for any entries less than $1.00.

    3. Edit any misplaced or illegible transcription entry to the proper transcription line, by placing an Asterisk (*) to the left
      of the misplaced or illegible entry and edit to the proper transcription line. Editing of the Entity require an Asterisk (*)
      to the left and lining through the item that is not to be transcribed.

      Note:

      The entry may have to be computed from other figures on the return or attachment.

    4. If numeric line items contain alpha characters, convert to numerics.

      Exception:

      Notations of “zero”
      , “none”
      and “blank”
      do not need to be converted to a numeric equivalent.

    5. If you can determine that a negative (minus) entry on a transcription line was entered on the incorrect line, Asterisk (*)
      (Form 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945, or CT-1) the entry to the left and edit it to the
      correct line.

  4. When editing a negative entry always edit the entry with a minus (-) sign to the left of the entry.

  5. ALL returns will be edited with the applicable code in a designated area on the return.

    • See Exhibit 3.11.13-1 for Form 941 (Rev 2009) Road Map

    • See Exhibit 3.11.13-2 for Form 941-PR Road Map

    • See Exhibit 3.11.13-3 for Form 941-SS Road Map

    • See Exhibit 3.11.13-4 for Form 941 Revision 2008 Road Map

    • See Exhibit 3.11.13-5 for Form 941 (Rev. 2004) Conversion Road Map

    • See Exhibit 3.11.13-6 for Form 941 TeleFile (Rev. 1-2003) Conversion Road Map

    • See Exhibit 3.11.13-7 for Form 941 TeleFile (Rev. 1-2005) Conversion Road Map

    • See Exhibit 3.11.13-8 for Form 943 Road Map

    • See Exhibit 3.11.13-9 for Form 943-PR Road Map

    • See Exhibit 3.11.13-10 for Form 944 Road Map

    • See Exhibit 3.11.13-11 for Form 944-PR Road Map

    • See Exhibit 3.11.13-12 for Form 944(SP) Road Map

    • See Exhibit 3.11.13-13 for Form 944-SS Road Map

    • See Exhibit 3.11.13-14 for Form 945 Road Map

    • See Exhibit 3.11.13-15 for Form CT-1 Road Map

    Note:

    Form 941-PR, 941-SS, 943-PR, 944-PR and 944-SS received with a domestic address (address in the 50 states or the District
    of Columbia) should be processed as a Foreign Return. Do Not convert to a Domestic Return, unless directed by an attachment
    to the return.

  6. After editing, the return and the schedules or attachments should be in the following sequential order when placed back into
    the batch This will assist ISRP/SCRIPS during data transcription:

    • Return page 1

    • Return page 2 (if applicable)

    • Schedules, if applicable

    • Any attachments.

  7. All Receipt and Control functions were mandated to locally develop sort procedures for non-remittance Form 941 returns marked
    “Amended”
    or “Corrected”
    (e.g. not circled). After sorting, these returns are forwarded to Accounts Management for their consideration as follows:

    IF THEN
    A non-remittance return marked “Amended”
    or “Corrected”
    (e.g. not circled) is received within Code and Edit,     		Do not perfect the return. Forward the return to Accounts Management.
    A non-remittance return marked “Amended”
    or “Corrected”
    is circled and received within Code and Edit,     		Continue to perfect the return using IRM 3.11.13 procedures. Do not forward these to Accounts Management . Accounts Management
    is attempting to re-enter (process) the return as an original.

3.11.13.11.1 
(01-01-2009)
♦Types of Edit Marks♦

  1. Edit marks are edited on the return for transcription by ISRP or SCRIPS. The editing must be entered in green pen.

  2. The only items edited on the return are those to be transcribed except where specific instructions require editing of a non-transcribed
    item. Lines are left blank if the entry would be a zero amount unless otherwise instructed.

  3. The original entry on a return is never obliterated, altered, or erased when deleting or correcting an entry. Always exercise
    care to ensure the original entry remains legible. Perfected entries provide a legible “edit trail”
    for anyone who may work with the return later.

  4. For a description of specific edit marks, see the tables below:

    EDIT MARKS AND DESCRIPTION
    EDIT MARK SCRIPS Form 941 ISRP DESCRIPTION
    Asterisk (*) X X Used to prompt the SCRIPS & ISRP system to stop at a field for the operator to verify or make a correction to the field; Used
    to delete tax data or to indicate that an item is not to be transcribed.

    Note:

    The Asterisk must be placed to the left of the entry as close as possible.

    Exception:

    An Asterisk in the signature box indicates that the signature is on an attachment or is not needed.
    Circle X X Used to delete a Received Date.

    Note:

    If the taxpayer circles an entry, edit the entry.
    Line Through X X Entity Perfection Only – Used to delete data. Unless otherwise specified, a horizontal line through data will always indicate the data is being
    deleted from the return.

    Note:

    Always edit an Asterisk, as close as possible, to the left of the lined through entry.
    Underline X X Used to identify a Name Control, that is to be transcribed.
    Minus Sign X X Indicates that the entry is negative.
    Decimal Point X X Indicates the separation of dollars and cents, if no distinction has been made by the taxpayer.
    Zero, dash, None X X “Zero”
    , “dash”
    , or “None”
    are considered valid entries except when specific instructions require editing of an entry.
    Edit Marks Made by other IRS Functions X X Edit marks entered by another area (such as Compliance or Accounts Management) are not to be re-edited except to place the
    marks in the correct area.
    Percent Sign X X Indicates the presence of a “In-Care-Of Name”
    or “Care of Address”
    “/”

    		 X X A”/”
    through the entire page, can be used when deleting a form or schedule that is not to be transcribed; or to indicate information
    may be on an attached page to make the return complete.
    “/”
    XX “/$”

    XX represents the two digit foreign country code.     		  X ISRP ONLY
    Indicates a foreign address. The two digit alpha foreign country code will be preceded by “/”
    and followed with “/$”
    . See Exhibit 3.11.13-23, Foreign Country Codes. This cannot be used for documents processed via SCRIPS.

    Note:

    The “X”
    and “arrow”
    will no longer be used in editing Forms 941, 943, 944, 945 & CT-1.

3.11.13.11.2 
(01-01-2009)
Disallowance of Erroneous Adjustment or Other Entries

  1. Place an Asterisk (*) (Forms 941 , 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945, or CT-1) to the left of
    an adjustment entry if there is an indication the entry is not a true adjustment of income tax withholding or Social Security/Medicare
    tax liability for a prior quarter. Rather, the entry represents a payment of an outstanding liability or FTD. The indication
    can be in the form of an attachment on the return.

    1. Prepare a Form 3465, Adjustment Request, and route to Accounts Management.

    2. If the taxpayer indicates that a FTD payment has been made on a return which does not provide for such payments, such as Form
      8752, the money can be located on a Form 941 module andAccounts Management should be notified to transfer the money from the
      Form 941 module if appropriate. See Figure 3.11.13-4.

    Note:

    Photocopy related materials and attach to the back of the Form 3465 and route to Accounts Management .

    Figure 3.11.13-4

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Deposit Made on Wrong Form

3.11.13.11.3 
(01-01-2009)
Non-Taxable Returns With No Line Entries

  1. Process a signed return containing no line entries as a non-taxable return. This includes a signed return with a CP 139 attached
    or with a notation indicating not liable to file for the quarter such as “No Employees This Quarter”
    , “No Wages Paid This Quarter”
    , etcetera. Edit SIC 1. See Figure 3.11.13-5.

    Note:

    If not signed, follow Signature Correspondence procedures.

    Figure 3.11.13-5

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Non-Taxable Return With No Line Entries

  2. Starting January 1, 2009, a taxpayer filing under Section 3509 for “Misclassified Employees”
    is instructed to file a Non-Taxable Return with a zero on Line 10 and write in red ink across the top of the return “Misclassified
    Employees”
    , complete Part 5 (signature field), and attach Form 941-X to the return. When a Non-Taxable 941 return is received with
    “Misclassified Employees”
    written in the top margin and Form 941-X is attached process as follows:

    1. Edit Action Trail “94X to AM”

    2. Edit Computer Condition Code (CCC) “X”
      to the return. This will prevent any payment from refunding while the adjustment is being processed.

    3. Detach Form 941-X and route to Accounts Management on Form 3465. Edit in remarks “Section 3509″
      .

    Note:

    If Form 941-X is attached, the Form 941 may not have “Misclassified Employee”
    written across the top of the return, look for an indication the taxpayer is filing under Section 3509 on Form 941-X Line
    19. The taxpayer is instructed to check the box to indicate the adjustment is filed under Section 3509. When the box is checked
    follow the procedures above a) – c).

  3. Process a Non-Taxable return with any indication of “Final”
    , “No longer in business”
    , “Do not file this form”
    , “Previously Filed a Final Return”
    , etcetera, using the following table:

    IF AND THEN
    Only the Entity information is present on the return and there are no attachments containing tax data, There is an indication of filing a Final Return and the return is signed, Edit SIC 1, as applicable.

    Note:

    If there is not an entry on the “Final date you paid wages”
    line, do not correspond for the entry (See 3.11.13.12.2 for Computer Condition Code F).

    There is an indication of filing a Final Return and the return is NOT signed, Step 1 – Correspond for signature.
    Step 2 – If corresponding for signature, also correspond for the “Final date you paid wages”
    , if blank.

    Note:

    Before corresponding research IDRS for status of filing requirement (Research two prior quarters to determine the status of
    the Filing Requirement). If the filing requirement is finalized (closed) or there is no filing requirement for the form being
    filed; send the return back to the taxpayer on Form 6800-A, stating the filing requirements have been finalized, explain they
    do not need to file now and they may receive returns in the interim.

    Step 3 – Edit SIC 1, as applicable.
    Step 4 – Follow applicable correspondence procedures for “with or without a reply correspondence”
    .

    There is an indication of a
    Previously
     Filed Final Return,     		Step 1 – Research IDRS to determine the status of the filing requirement (Research two prior quarters to determine the status of
    the Filing Requirement).
    Step 2 – If the filing requirement is finalized (closed) or there is no filing requirement for the form being filed; send the return
    back to the taxpayer on Form 6800-A, stating the filing requirements have been finalized, explain they do not need to file
    now and they may receive returns in the interim.
    Step 3 – If the filing requirement is open, follow “There is an indication of filing a final return”
    procedures above (return is signed or not signed).

  4. A signature is not required if the taxpayer indicates that they received the wrong type of return, and that another type of
    return has been filed, providing the following actions are taken before CCC “F”
    is entered:

    1. Prepare Form 4227 (or Form 6882, IDRS/Master File Information Request), for research to be performed to determine whether
      the proper filing requirement has been established for the return the taxpayer states was filed. Request on the Form 4227
      or 6882 to research for the entity and MFT of the appropriate return.

    2. If research shows a filing requirement for the appropriate return, process the incorrect return as final to turn off the filing
      requirement.

    3. If research shows that the taxpayer does not have a filing requirement for the return he/she states should be filed, attach
      the research papers to the invalid return and forward to Entity Control on Form 4227 for filing requirement determination.
      If the filing requirement is incorrect, Entity Control will change it and notate the change on Form 4227. The return will
      be sent back to Code and Edit to be converted to the proper return (If the return is unsigned signature correspondence may
      be required).

3.11.13.12 
(01-01-2009)
Specific Employment Return Editing

  1. Besides editing marks on return lines, Code and Edit examiners may edit specific codes on a return in a specified location
    to indicate, for example, special conditions, correspondence, pre-computed penalty and interest, or a received date to a delinquent
    returns.

  2. Reference to Form 941 Revision 2005 and subsequent that will be processed through SCRIPS will be referred to as SCRIPS Form
    941.

3.11.13.12.1 
(01-01-2009)
♦Action Codes♦

  1. Action Codes are used to indicate whether correspondence, research, or some other action is needed. The Action Code will determine
    the suspense period to be assigned to the return and place the return in the workable or unworkable suspense inventory. See
    Exhibit 3.11.13-19 for a list of valid Action Codes.

  2. When necessary, a three-digit Action Code will be assigned by the tax examiner.

  3. Edit an Action Code for Forms 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945 and CT-1 in the bottom left
    margin of the return directly below the words “For Privacy Act”
    . Action Code are used to address correspondence issues See Figure 3.11.13-6    .

  4. Assign Action Codes in the following priority order:

    1. Action Code 310 (Statute Control). See IRM 3.11.13.35 Statute Returns.

    2. Action Code 320 (Entity Control).

    3. Action Code 4XX.

    4. Action Code 6XX.

    5. Action Code 3XX.

    6. Action Code 2XX (Correspondence).

    Note:

    Use Action Code 211, 225, or 226 before Action Code 341 to ensure the return is complete before a manual refund is issued.

    Figure 3.11.13-6

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Editing Action Code 211 - Paperless Correspondence

  5. Only one Action Code can be assigned to a return at one time. If more than one Action Code is needed, edit the second Action
    Code on Form 4227. See Figure 3.11.13-7.

    Note:

    For SCRIPS Perfect returns, If more than one Action Code is needed, edit the second Action Code on Form 4227, pull the return
    from Perfect batch and request it be merged into an Imperfect batch.

    Figure 3.11.13-7

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Edit Two Action Codes – Requiring Form 4227

  6. If more than one Action Code of the same priority is required (e.g. 342 and 355), edit the Action Code with the shortest suspense
    period. Attach Form 4227 to indicate the second unprocessable condition.

  7. Edit the following Action Codes when a return cannot be perfected from the information present:

    Action Code Description
    211 ( First Correspondence), • Return is illegible, incomplete, or contradictory that it is not acceptable for computer processing.
    • The taxpayer notates on the return or attachment that they are reporting tax for more than one tax period or for more than
    one type of tax.
    225 (Correspondence for Signature Only), Unsigned returns only; U.S. addresses only
    226 (Correspondence for Signature Only)
    OSPC Only,     		Unsigned foreign returns; International addresses only
    610 (Renumbered Non-remittance), or
    611 (Renumbered with Remittance),     		A return is mis-blocked (e.g. Form 1065 found in an 1120 batch of work)
    650 ( International), • The return is an international return and must be forwarded to OSPC.
    • Return has a foreign address and must be forwarded to OSPC.
    Note: An APO/FPO address is not considered foreign.
    480 (Early Filed- Suspense), The return is an early filed current return.

    Note:

    A Form 941 filed early may be processed during the quarter shown on the return.
    640 (Void), To delete the assigned DLN on the return (e.g. re-entry returns).

  8. Continue perfecting the return after editing the Action Codes.

3.11.13.12.2 
(01-01-2009)
♦Computer Condition Codes (CCC)♦

  1. Computer Condition Codes (CCC) are used to identify a special condition or computation to post to the Master File.

  2. Computer Condition Codes (CCC) editing location:

    1. Forms 941, 941-PR, 941-SS (Revision 2005 and subsequent), 944, 944-PR, 944(SP) and 944-SS – edit the CCC at the end of the
      “You MUST fill out both pages of this form and SIGN it”
      line; otherwise, in the center of the return below line 13 Forms 941 or line 12 Forms 944.

    2. Forms 941, 941-PR, 941-SS (Revision 2004), 943, 943-PR, , 945, and CT-1 – edit the CCC in the bottom center margin.

  3. Computer Condition Codes (CCC) description:

    Computer Condition Code (CCC) Title Explanation
    B Exempt Social Security Or Medicare Tax Edit CCC “B”
    when line 4 box (Form 941) or line 3 box (Form 944) is checked .

    CCC “B”
    is used to indicate that:
    a. The maximum amount of Social Security tax has been paid
    b. Wages for children under 18 years old
    c. Minister wages
    d. Railroad
    e. United Transportation Union
    f. Non-qualified Plan (Section 457 plan)
    g. “Church FICA Issue”
    (For additional information See IRM 3.11.13.15.5)
    h. Foreign Employer with U.S. Employees

    Form 941 and 944:
    1. Edit CCC “B”
    when all these conditions are present:

    1. Line 2 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    2. Line 5a through 5c, Column 2 (Form 941), or line 4a through 4c Column 2 (Form 944) are blank, dash, zero (0), none, or “n/a”
      ,

    3. Line 4 (Form 941) or line 3 (Form 944) is not checked, but the taxpayer is indicating being exempt from Social Security and/
      or Medicare tax on the return or attachment due to one of the conditions in list a-h above.

    2. If the taxpayer indicates or notes “EXEMPT”
    , but does not indicate a reason:

    1. Review the return and attachments for an Employment Code (See figure 3.11.13-31 for the location of the Employment Code on
      an IRS issued label). If the Employment Code is a “C”
      , “F”
      or “G”
      , edit CCC “B”
      and continue to process the return.

    2. If you can not determine the taxpayers reason for claiming to be exempt research IDRS (e.g. INOLE) for the Employment Code.
      If the Employment Code is”C”
      , “F”
      or “G”
      , edit CCC “B”
      and continue to process the return.

    3. If the Employment Codes can not be determined or is other than “C”
      , “F”
      , or “G”
      :
      Form 941: edit the line 2 amount to line(s) 5a and 5c, Column 1 .
      Form 944: edit the line 1 amount to line(s) 4a and 4c Column 1.

    C Unexplained Adjustment 1. This CCC is used to request from the taxpayer Form 941c or a supporting explanation for the adjustment taken, (CP 175).
    2. Edit CCC “C”
    when no reason (or an insufficient reason) is given for:
    a. A negative withholding tax adjustment ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ claimed by the taxpayer, or
    b. Any negative Social Security or Medicare tax adjustment of ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    Caution:

    Instructions are contained within the text of IRM 3.11.13 which may deviate from normal processing procedures requiring CCC
    “C”
    entry. The examiner should follow the “Exception to Processing”
    procedures as instructed. For example, See IRM 3.11.13.17.7 for Form 941c.

    D Reasonable Cause for Failing To Pay Timely Edit a CCC “D”
    to returns prepared under IRC 6020(b) with a notation of “DO NOT ASSESS FAILURE TO PAY PENALTY”
    by the Revenue Officer.
    CCC “D”
    will no longer be edited, if the taxpayer requests abatement for Failing to Pay Timely when the return is submitted. Send
    1382C letter, which will inform the taxpayer of the proper procedure to follow to request abatement, if, and when a penalty
    is assessed.
    In the cases of disaster, the examiners will be provided with coding procedures.
    F Final Return Edit CCC “F”
    when the taxpayer:
    1. Checks the “FINAL”
    box,
    2. Gives a positive indication that they are not liable to file a return in the future with a notation such as, (but not limited
    to ):
    – “Final”

    –”Out of Business”
    ,
    – “No Longer Have Employees”
    ,
    –”Deceased”
    ,
    – “Liquidation”
    , or
    – “Dissolved”
    .

    Reminder:

    If editing CCC “F”
    always check the final box, if not already checked.

    See IRM 3.11.13.11.3 Non-Taxable Returns with No Line Entries.

    Do not edit CCC “F”
    when:
    1. The taxpayer elects to have a credit applied to the next return.
    2. The Date of Final Wages was not provided on a return showing tax data, See Note below.
    3. The Date of Final Wages is
    after
     the last day of the tax period.
    4. The taxpayer has indicated that he/she will not be liable to file the return in the future, AND that they are “Seasonal”
    . In this situation, edit CCC “T”
    unless the taxpayer has given the Date of Final Wages.
    NOTE:
    • If the taxpayer has indicated that they will not be liable for filing the return in the future by checking the box or by
    a notation on the return (i.e. “Final”
    , “Out of Business”
    , etc) and the “Date of final wages”
    is blank, then :

    1. If the return shows tax data, correspond for the “Date of final wages”
      .

    2. If the return shows no tax data, DO NOT correspond for the “Date of final wages”
      .

    • If the taxpayer files two or more quarters or years at the same time and the return indicates that they will not be liable
    to file the return in the future , edit CCC “F”
    on the last quarterly or annual return. Also, edit remarks on each of the earlier quarterly or annual returns to indicate
    that the latest tax period has been edited with a CCC “F”
    .

    G Amended Return

    Note:

    Edited to returns processed through ISRP only.

    		 1. An Amended return may be identified by such wording as “Superseding”
    ,”Duplicate”
    , “Additional”
    or any positive indication that the taxpayer has filed previously. Filing a “Copy”
    of a return is not sufficient reason to label a return “Amended”
    unless accompanied by a positive statement from the taxpayer. See IRM 3.11.13.27 for processing guidelines.
    2. The following procedures and conditions have been placed on the use of CCC “G”

    a. The return must be perfected for a Name Control (unless Check Digits are present), EIN, tax period, CCC “G”
    , Received Date, and Signature.
    b. If the return has a TC 59X or ICS which was entered by Collections or Exam and any indication of an amended return, process
    the return as an original return. Do not edit CCC “G”
    on these return.

    Note:

    All Receipt and Control functions were mandated to locally develop sort procedures for non-remittance Forms 941 marked “Amended”
    , or “Corrected”
    . After sorting, these returns are forwarded to Accounts Management for their consideration. Therefore, if a non-remittance
    return marked “Amended”
    , or “Corrected”
    is received within Code and Edit, do not perfect the return, forward it to Accounts Management. This is a minimum standard requirement. Additionally, Code and Edit may receive returns with “Amended”
    , or “Corrected”
    circled. Do not forward these to Accounts Management. These returns are being re-input as original returns by Accounts Management. Therefore, continue to perfect these returns
    using Code and Edit procedures provided in IRM 3.11.13.

    Caution:

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ “”
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    J Reasonable Cause for Failing To Make Timely Deposits Edit CCC “J”
    when the taxpayer notates at the top of the return :
    a.“3121 Agreement”
    (e.g. U.S., State, municipalities, or local, government agencies). These taxpayers are not required to make FTD payments.
    Also, edit a SIC 1 as applicable.

    Note:

    If the taxpayer only refers to IRC 3121 by providing a particular paragraph as a reference (e.g. for example, IRC 3121q) on
    the return or on an attachment, do not edit CCC J.

    b.“PL92-603″
    The taxpayer is a Religious Order reporting back taxes on Form 941 Line 7e but the tax has not been paid.
    c.“Fiscal Agent”
    , “Household Employer Agent”
    , “Home-Care Services”
    or “chore worker”
    Form 941 and 943 which has been filed by a state, local or municipal government to report tax due on domestic workers.

    Note:

    CCC “J”
    will no longer be edited, if the taxpayer requests abatement for Failing to Make Timely Deposits when the return is submitted.
    Send 1382C letter, which will inform the taxpayer of the proper procedure to follow to request abatement, if, and when a penalty
    is assessed.
    In the cases of disaster, the examiners will be provided with coding procedures.

    M Misclassified Employees- Interest Free Adjustments 1. Enter the code on the return indicating “Misclassified Employees”
    at the top of the return. These taxpayers are allowed interest free adjustments if certain conditions are met. Employers
    are instructed to write “Misclassified Employees”
    at the top of the return, and to indicate the date they ascertained the error. In order for the adjustment to be interest
    free, the return must be filed by the due date of the tax period the error was ascertained. If not, interest is computed from
    the original due date of the tax period for which the return is being filed. If Income Tax Withholding, Social Security or
    Medicare tax is not paid by the due date of the tax period the error was ascertained, interest is computed from the due date
    of the tax period the error was ascertained.

    Note:

    Beginning January 1, 2009 adjustments reported on the adjusted return (i.e. Form 941-X) must be paid by the time the adjusted
    return is filed.

    2. Upon identification of a “Misclassified Employees”
    return, do the following:
    a. Assure that the information is attached verifying the date the taxpayer ascertained the error.
    b. If the taxpayer does not attach information verifying the date he/she ascertained the error, correspond with the taxpayer
    to request the information, (e.g. use Action Code 211).
    c. If no reply, do not allow the interest free provision. Continue processing.

    O Module Freeze Computer Condition Code is entered when a Pre-Settlement Manual Refund will be made and a Form 3753, Manual Refund Posting Voucher, Form 5792, Request for IDRS Generated Refund (IGR), or Form 12857, Refund Transfer
    Posting Voucher is attached.
    a. Verify that the Name Control, EIN, and tax period on the return is the same as the data on the form.
    b. Research to determine if TC 840 (Manual Refund Transaction) has posted.
    - If TC 840 has posted, enter CCC “O”
    and continue processing.
    - If TC 840 has not posted, enter Action Code 344 in the left margin of the return to issue a manual refund.
    P Mail-Out Indicator Edit CCC “P”
    on a current year period (Form 941 current year current quarter) return when the return has:
    •Form 941 – a form identification number in the top right margin that begins with “95″
    or “96″

    • the unique identifier of “(77)”
    in the top right margin next to the literal “Internal Revenue Service”
    .
    • The taxpayer is requesting a tax package (Do not edit CCC P if the request is for a form other than the return being filed).
    • Or otherwise instructed.

    Exception:

    Do Not edit CCC “P”
    if the return is amended, final, or a prior tax period.

    R Reasonable Cause for Failure to Timely File

    Note:

    Edit CCC “R”
    to the return when there is an indication such as “Do not assess failure to file penalty”
    on a secured return noted with “599″
    .

    If the taxpayer requests abatement for Failing to Timely File when the return is submitted. Send 1382C letter, which will
    inform the taxpayer of the proper procedure to follow to request abatement, if, and when a penalty is assessed.
    In the cases of disaster, the examiners will be provided with coding procedures.

    T Seasonal Filer Edit CCC “T”
    when:
    1. The “Seasonal”
    filer box is checked beneath the entity area (Form 941, Rev 2004) or on line 17 (Form 941, Rev. 2005 and subsequent).
    2. There is an indication on the return that the taxpayer will not be liable to file the return in the future, AND “that they
    are Seasonal”
    .
    3. If editing CCC “T”
    , check the box on Line 17 if not already checked.
    W “Cleared by Statute”
    or “Approved by Statute”
    Stamped on Return    		 Refer to IRM 3.11.13.35, Statute Returns.
    X Refund/ Settlement Freeze Edit CCC “X”
    when:
    1. The taxpayer requests that any excess remittance, after paying all the tax and penalties, be applied to another account.
    Follow the procedures in #3 below.
    2. There is no reply to correspondence and a refund is due. Edit CCC “3″
    as well.
    3. Process as Follows:
    Step 1 – Prepare Form 3465 to request transfer of the excess remittance amount to an alternate account.
    Step 2- Notate “Form 3465 Prepared”
    on the margin and edit CCC “X”
    on the return.
    Step 3 – Photocopy the return, and attach to Form 3465.
    Step 4 – Route the package to Accounts Management.
    3 No Reply to Correspondence Edit CCC “3″
    when:
    The taxpayer fails to respond to correspondence, or when the correspondence is returned undeliverable.
    4 6020(b) Return • Edit CCC “4″
    on all Compliance (Collection or Examination) issued IRC 6020(b) returns.
    • Edit SIC 1 to Form 941, 943, 944 and 945.

    Note:

    CCC “4″
    cannot be used with CCC”C”
    or “R”
    .

    Note:

    6020(b) will be processed through ISRP.
    7 Reasonable Cause Denied CCC “7″
    will no longer be edited, if the taxpayer requests abatement for Failing to File or Pay Timely when the return is submitted.
    Send 1382C letter, which will inform the taxpayer of the proper procedure to follow to request abatement, if, and when a penalty
    is assessed.
    In the cases of disaster, the examiners will be provided with coding procedures.

    Figure 3.11.13-8

    This image has been removed because it contains Official Use Only.
    Please click here for the text description of the image.

    This image has been removed because it contains Official Use Only.

3.11.13.12.3 
(01-01-2009)
♦Error Resolution System (ERS) Coding♦

  1. The Error Resolution System (ERS) displays data on terminal display screens with corrections made and integrity verified in
    a real time environment.

  2. The Code and Edit tax examiner will have the first opportunity to identify a record having a problem which requires correspondence,
    research or other action in order to make the return processable. The tax examiner will determine the kind of action required
    and assign an Action Code to the return. The code will indicate whether correspondence, research or some other action is needed.

3.11.13.12.4 
(01-01-2009)
Pre-Computed Penalties Other than Delinquency, Failure to Deposit (FTD), Minimum Penalty for Extended Failure to File, or
Failure to Pay (FTP)

  1. The Internal Revenue Code provides for other penalties to be assessed against taxpayers.

    • Section 6663 (Fraud) -A delinquency penalty may be assessed when this penalty is assessed.

    • Section 6674 -Fraudulent statement or failure to furnish statement to employee (Form W-2).

  2. Provisions have not been made for assessing these penalties on the original input of the return. Therefore, they should not
    be included in the penalty and interest box.

    IF THEN
    Pre-computed penalties other than delinquency, FTD or FTP are assessed, Step 1 – Prepare Form 3465, Request for Adjustment, to request an assessment of the penalty. If a remittance amount includes all
    or part of the penalty, indicate on the Form 3465 that this portion of the remittance is available for application to the
    assessment.
    Step 2 – Annotate in the left margin of the return “3465 Prep”
    . Route Form 3465 to Accounts Management.
    Step 3 – Edit CCC “X”
    to freeze any refund amount until the assessment of penalty posts to the BMF.

  3. Failure to Deposit -When a pre-computed Failure-to-Deposit penalty is shown on the return, add the penalty amount to the balance due amount or,
    subtract the amount of the penalty from the overpayment (refund) amount claimed.

  4. Delinquency, Failure to Pay and Minimum Penalty - When a delinquency, Failure-to-Pay, or Minimum penalty is shown on the return, subtract the penalty from the balance due
    amount if the taxpayer has computed the penalty and interest and added it to the balance due amount.

3.11.13.12.5 
(01-01-2009)
Delinquent Returns

  1. A return is normally delinquent if it is not received on or before the return due date. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ A return is not delinquent if the return is timely postmarked and mailed before,
    or on the due date. If the due date falls on a weekend or legal holiday, the return is timely if postmarked by the first business
    day following the weekend or holiday. See IRM 3.11.13.12.6 for instruction on determining the Received Date of the return.

  2. If the return is delinquent, check the return or attachments for an explanation of late filing. If found, send the taxpayer
    1382C letter to inform the taxpayer that we have received their request. Do not code the return with CCC R if a pre-computed
    delinquency penalty is shown.

    Exception:

    For secured or prepared returns, edit the applicable CCC as indicated on the return or attachment.

  3. The chart below shows the normal due date and delinquent dates for Employment Returns:

    TABLE OF DUE DATES
    FORM PERIOD COVERED PERIOD ENDING DUE DATE ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    941/941-PR/941-SS OCT., NOV., DEC. DEC. 31, 2008 JAN. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    941/941-PR/941-SS JAN., FEB., MAR. MAR. 31, 2009 APR. 30, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    941/941-PR/941-SS APR., MAY, JUN. JUN. 30, 2009 JUL. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    941/941-PR/941-SS JUL., AUG., SEP. SEP. 30, 2009 OCT. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    943/943-PR JAN. – DEC. DEC. 31, 2008 JAN. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    944/944(SP)/944-PR/944-SS JAN. – DEC. DEC. 31, 2008 JAN. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    945 JAN. – DEC. DEC. 31, 2008 JAN. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    CT-1 JAN. – DEC. DEC. 31, 2008 JAN. 31, 2009 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

3.11.13.12.6 
(01-01-2009)
♦Received Dates♦

  1. A valid IRS received date is required on the following returns:

    • Delinquent

    • Prior year

    • Amended (e.g. CCC “G”
      coded)

    • Re-entry

    • 6020(b)

    • Substitute for Return (SFR)

    • Pre-computed penalty and interest is present.

    Note:

    Re-entry Documents that do not have a received date, edit the due date for the tax period shown on the return as the received
    date.

  2. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡     		≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    ≡ ≡ ≡

    Note:

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡

  3. The received date may or may not be stamped on the face of the return.

  4. If the date stamp is required or the date stamp is illegible or invalid or has been erroneously circled, determine and edit
    the received date in the MMDDYY format to the face of the return in the center according to the following priority and procedures:

    1. The earliest legible postmark date (e.g. U.S. Postal Service or Private Delivery Service) on the envelope. Rules for using
      the U.S. Postal Service (USPS) postmark or Private Delivery Service (PDS) postmark are as follows:

      IF THEN
      An envelope has both a USPS or PDS, and a private metered postmark, Always use the USPS or PDS postmark.
      An envelope has two private metered postmarks, Always use the latest private metered postmark.
      An envelope has only one private metered postmark, Use the private metered postmark.

    2. The Revenue Officers Signature date.

    3. The Signature date (if in the processing year/quarter, as applicable)

    4. The Julian Control date minus 10 days in the DLN.

    5. The current date minus 10 days.

  5. Edit the Received Date as follows:

    IF AND THEN
    A timely Received Date is the only received date stamped on the return,   Circle the received date(s).
    Two or more dates are stamped on the return ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ,   Use the earliest IRS stamped received date. Circle out all other dates.
    A Federal return is addressed to the IRS, Delivered to a State agency, Use the postmark date as the received date.
    A Federal return is addressed to the State agency,   Use the IRS date stamp as the received date.

    Reminder:

    If an envelope is attached to the return, always check the envelope for remittance. If found, hand carry remittance to manager.

    Note:

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡

  6. Accept a received date entered by means other than a normal date stamp (for example, a handwritten date in brown, red, orange,
    or green), or a typed date by an IRS employee, cash register stamp date, etc.

  7. Circle and do not enter on the return a received date under the following circumstances:

    1. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    2. The first return in a block of RPS returns, if it is date stamped, provided the return is timely filed.

    3. The taxpayer has sent back a timely filed original return and correspondence, and notated that the return was correct as originally
      filed, (e.g., no changes are required). If the return was not an original, timely filed return, follow the procedures in (1)
      above.

    4. Returns filed by the Department of Labor under the Fair Labor Standards Act, the General Accounting Office and Housing and
      Urban Development under the Davis–Bacon Act, or the National Labor Relations Board under the Labor Management Relations Act.

  8. See Figure 3.11.13-9 for an example of a correctly edited received date on a return.

    Figure 3.11.13-9

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Editing Correct Received Date

3.11.13.12.7 
(01-01-2009)
♦Signature Area♦

  1. A signature and jurat is required on all returns except the following:

    Note:

    If a signature does not appear below the jurat, follow the procedures in the IF/THEN table below. Also, if the jurat is altered
    or stricken (crossed out), See IRM 3.11.13.30 , Potential Frivolous Returns.

    1. Returns prepared under IRC 6020(b). These returns must be signed by a Revenue Officer or Compliance Services representative
      (See IRM 3.11.13.34.1).

      Note:

      Accept a 6020(b) return, as signed when Form 5604, Section 6020(b) Action Sheet is attached and a signature is in the “Signature
      of Initiating Collection Employee”
      box.

    2. Returns prepared by Examination, for example “SFR”
      or “Substitute for Return”
      (See IRM 3.11.13.34.3).

      Reminder:

      Returns secured by Examination do require a signature and jurat.

    3. Dummy returns prepared by IRS.

    4. Returns filed under IRC 501(d) (Religious or Apostolic Organizations).

    5. A blank return with a CP 139 attached (e.g. notification that Forms 941 or 940 may no longer be required because four consecutive
      941 tax years were received with “NO LIABILITY”
      ).

    6. A Composite 941 return with Form(s) 941-M attached signed by the taxpayer.

    7. When correspondence is attached showing that the taxpayer is responding to an IRS letter (See paragraph (3) below).

    8. Taxpayer indicates he/she files another type of return and IDRS research provides proof the taxpayer does not have a filing
      requirement set for the return in question.

    9. It appears that the taxpayer is “IRATE”
      because he/she was mailed another return package after filing a “FINAL”
      return in the previous year.

      Note:

      If there is an indication of a previously finalized return follow procedures in IRM 3.11.13.11.3 Non-Taxable Returns With
      No Line Entries.

    10. Computer generated returns with a complete jurat and computer generated signatures.

    Note:

    SCRIPS Form 941 (Revision 2005 and subsequent) – Edit an Asterisk (*) in the left most position of the “Sign your name here”
    box when a signature is not required on the return.

  2. Do not attempt to secure a written signature or jurat on a return which was initially filed electronically (941PC, etc.),
    and is being re-entered. See IRM 3.11.13.31, Re-Entry Document Procedures.

  3. Accept a “signature declaration”
    (i.e. a signature with a jurat obtained through IRS correspondence) if it is attached to the return.

    1. If the “signature declaration”
      is altered or stricken, see Identification of Frivolous Returns in IRM 3.11.13.30

    2. If the taxpayer responds with a self prepared “signature declaration”
      , it must contain the same language as the jurat on the return. i.e., “Under penalties of perjury, I declare that I have
      examined this return including accompanying schedules and statements, and to the best of my knowledge and belief, it is true,
      correct, and complete.”

    Note:

    SCRIPS Form 941 (Revision 2005 and subsequent) – Edit an Asterisk (*) in the left most position of the “Sign your name here”
    box to indicate the signature declaration is attached.

    Note:

    Do Not correspond for a signature on CIS returns. See IRM 3.11.13.33 (Correspondence Imaging System) for processing instructions.

  4. Since tax examiners are not expected to be handwriting experts, regulations allow us to presume that the signature on a return,
    statement or other document is the true signature of the person who actually signed the document.

    Note:

    Very often, a preparer will mark a signature line with an “X”
    to indicate where a taxpayer should sign the return. When this happens:

    IF AND THEN
    An “X”
    is shown in the “Sign your name here”
    box,    		 There is a name shown in the “Print your name here”
    box,    		 Do Not Correspond.
    An “X”
    is shown in the “Sign your name here”
    box,    		 The “Print your name here”
    box is blank,    		 Correspond with the taxpayer to obtain a signature.

  5. Facsimile Signature – Rather than actually signing each return, Revenue Ruling 2005–39 allows a duly authorized agent to use
    a “facsimile”
    (computer-generated or rubber stamp) of a signature when filing certain forms (such as Form 941, 943, 944, 945 or CT-1). If a facsimile signature is used, the person filing the form must retain a letter, signed by the individual authorized to
    sign the return(s) declaring under penalties of perjury that the facsimile signature appearing on the form is the signature
    adopted by the individual, and the facsimile signature was placed on the return by the direction of the individual.

    1. A signature of an individual, officer, partner, duly authorized agent, etc. can be printed, typed, rubber stamped, computer
      generated, or affixed by some other mechanical device, is acceptable as a signed return on Form 941, 943, 944, 945, or CT-1.
      A signature refers to the name of the individual who attests that the information on the return is true, correct and complete.
      See Figure 3.11.13-10 for an example of a return that has been signed using a mechanical device

    2. The signature may appear on either “Sign your name here”
      or “Print your name and title”
      line.

    3. If no signature is found follow signature correspondence procedures in IRM 3.11.13.6

    Figure 3.11.13-10

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Acceptable Signature Using A Mechanical Device Under Revenue Procedure 2005-39.

  6. If a signature or jurat is not present and is the only correspondence issue, process per IRM 3.11.13.6.

  7. Only one correspondence attempt is required for a signature or jurat. If you do not receive a reply after the prescribed suspense
    period, input the return and process it following the no reply procedures in IRM 3.11.13.6.

3.11.13.13 
(01-01-2009)
♦Entity Perfection – General♦

  1. The entity area of a tax return identifies the taxpayer on the Business Master File. The entity section of the return contains
    the following: See Figure 3.11.13-11a and Figure 3.11.13-11b. which will show the location on the return by the alpha character
    assigned below:

    1. Employer Identification Number (EIN)

    2. Tax Period

    3. Name and Address

    4. Check Digits (if any)

    Figure 3.11.13-11a

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Elements of a Pre-Addressed Entity Area

    Figure 3.11.13-11b

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Element of a Non-Preaddressed Entity Area

  2. There are two types of entities:

    1. Preaddressed - an IRS preprinted label (whit Check Digits).

    2. Non-preaddressed - Handwritten or typed (No Check Digits).

    Note:

    Some forms have IRS labels printed under the National Change of Address (NCOA) program. These returns can be identified by
    a solid black line (See Figure 3.11.13-12a.) or by pound signs (See Figure 3.11.13-12b.) above and to the left of the entity
    area. These returns do not contain check digits and are not considered to be pre-addressed.

    Figure 3.11.13-12

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    NCOA Change of Address and Name Control Editing

3.11.13.13.1 
(01-01-2009)
♦Entity Perfection – Name Control♦

  1. The Name Control consists of four characters or less:

    1. Valid characters are alpha, numeric, ampersand (&), hyphen (-), and blank. However, blanks are only valid in the last three
      positions.

    2. Disregard the word “The”
      in the Name Control only when more than one word follows.

    Note:

    If an individual and a trade name are present and it can be determined the trade name is for a corporation or partnership,
    follow the Name Control procedures for corporations or partnerships. If other than a corporation or partnership, follow the
    Name Control procedures for individuals, regardless of which line the individuals name is listed.

  2. See Job Aid Document 7071A, BMF Name Control Job Aid, to properly determine the Name Control.

  3. Edit the Name Control as follows:

    1. Preaddressed return (i.e. a return with a label containing check digits):

      IF AND THEN
      Check Digits are present, No changes have been made to the IRS label by the taxpayer, No editing is necessary.
      A first name line change clearly relates to the same taxpayer, Is a minor change that does not affect the Name Control, Input TC 013. A new EIN is not needed. See Figure 3.11.13-13a.
      There is a change to the primary name line affecting the Name Control and the EIN is not changed,

      Note: If the EIN was changed See IRM 3.11.13.13.3, for Entity Perfection – EIN instructions.

      		Numbered, Edit Action Code 320, as appropriate.
      Unnumbered, Step 1 – The return is unprocessable.
      Step 2- Route to Entity Control.
      See Figure 3.11.13-13b.
      A change to the second Name (e.g., revision of the trade name or a DBA name),   Step 1 – Notate”TC 016″
      in the upper left margin of the return.
      Step 2 – Input “TC 016″
      . See Figure 3.11.13-14
      There are any questionable entity changes, Numbered, Edit Action Code 320.
      Unnumbered, Route to Entity Control.

      Figure 3.11.13-13

      This image is too large to be displayed in the current screen.

      Please click the link to view the image.

      Primary Name Line Change – No Change to the Name Control

      Figure 3.11.13-14

      This image is too large to be displayed in the current screen.

      Please click the link to view the image.

      Second Name Line Change – No Change to the Name Control

    2. Non-Preaddressed return (i.e. a return with a label containing altered check digits or no check digits present):

    IF AND THEN
    The check digits are not present, have been altered or other than a IRS label,   Underline the Name Control.
    A second name is present and begins with “FKA”
    or “Formerly Known As”
    ,     		  Continue processing the return.
    A second name is present and begins with “AKA”
    (also known as) or “DBA”
    (doing business as) etc.,     		  Edit an Asterisk (*) to the left and Line through the abbreviation, if present.
    Unable to determine the Name Control, Numbered, Edit Action Code 352 (Name Research).
    Unnumbered, Step 1 – Research IDRS.
    Step 2 – If not found, route to Entity Control.

  4. Input TC 013 when there is a name change (primary and secondary) on Form CT-1 as these changes cannot be input through ISRP.

3.11.13.13.2 
(01-01-2009)
♦Entity Perfection -”In-Care-Of”
Name♦

  1. An “in-care-of”
    name can be identified by the words “in care of”
    or the symbol “c/o”
    or “%”
    (percent sign).

  2. Ensure that the “in-care-of”
    name is located above the street address.

    IF THEN
    The in-care-of name is located on the street address, No editing is required,
    The in-care-of name is located below the street address, Step 1 – Edit an Asterisk (*) and line through the “in-care-of”
    name,
    Step 2 – Edit the “in-care-of”
    name above the street address beginning with the “%”
    or “c/o”
    in the first position,
    Step 3 – Continue processing the return.
    The “in-care-of”
    name is shown on an attachment,     		Edit the “in-care-of”
    name above the street address beginning with the “%”
    or”c/o”
    in the first position.
    The street address for the “in-care-of”
    name is different from the street address of the employer,     		Step 1 – As necessary, Asterisk and line through the “in-care-of”
    street address and edit below the “in-care-of”
    name or edit the “in-care-of”
    street address below the “in-care-of”
    name if located on an attachment,
    Step 2 – Edit an Asterisk (*) to the left and Line through the employers street address and input “TC 016″
    , (See IRM 3.11.13.13.5)
    Step 3 – Continue editing the return.

    Note:

    Always Edit an Asterisk (*) to the left and Line through the “in-care-of”
    symbol (% or c/o) if it is present with an address. Do not use the ampersand (&) or the percent sign (%) when editing
    the address information.

  3. A “care-of name”
    change can be determined by any of the following:

    • A check mark in the “Address change”
      box (Form 943 and 945), or

    • An indication that the “in-care-of”
      name is changed (i.e., the taxpayer crossed out the original “in-care-of”
      name and added the new name or has entered a new “in-care-of”
      name in brackets)

    IF THEN
    An “in-care-of”
    name is changed but there is no indication of an address change,     		Step 1 – Edit the “in-care-of”
    name as indicated above in (2),
    Step 2 – Continue editing the return.
    An “in-care-of”
    name is present and the “Address change”
    box is checked (or there is an indication of an address change),     		Step 1 – Edit the “in-care-of”
    name as indicated above in (2),
    Step 2 – Correct the address, See IRM 3.11.13.13.5.
    Step 3 – Continue to process the return.

3.11.13.13.3 
(01-01-2009)
♦Entity Perfection – Employer Identification Number (EIN)♦

  1. The EIN is a nine-digit number (XX-XXXXXXX) assigned to identify the taxpayer.

  2. The EIN is located in the entity area of the form (“Employer Identification Number”
    field) or the top left corner of the preprinted label.

  3. Determine the EIN on Preaddressed Returns as follows:

    IF AND THEN
    The taxpayer changes the EIN, Also changes the first name line, Step 1 – Underline the Name Control,
    Step 2 – Edit an Asterisk (*) to the left and Line through the Check Digits, if present,
    Step 3 – Continue processing the return.
    The taxpayer doesnt change the EIN, There is a major change to the Name Control line, Step 1 – Fully edit the return,
    Step 2 – Route to Entity for assignment of a new EIN.
    There is an EIN change by the taxpayer, No change to the Name Control line, Step 1 – Research IDRS to determine if a new EIN is on the account,
    Step 2 – If a new EIN is located on IDRS, edit an Asterisk (*) to the left and line through the old EIN and Check Digits, if the
    taxpayer has not already done so,
    Step 3 – If a new EIN is not on IDRS, route to Entity.
    The return has been given a new EIN by Entity Control, The return is notated “TC 011″
    or “IDRS EIN”
    (Entity has already taken the necessary action),     		Step 1 – Underline the Name Control,
    Step 2 – edit an Asterisk (*) to the left and Line through the Check Digits, if present.

  4. Determine the EIN on Non-Preaddressed Returns as follows:

    IF AND THEN
    EIN is missing, You can determine the correct EIN from the return, attachments and/or schedules, Edit the EIN to the appropriate location on the return.
    Multiple EINs are present, or either a PTIN or ITIN are present, Unnumbered, Route to Entity for EIN assignment.
    Numbered, Edit Action Code 320.
    The EIN contains any of the following conditions and cannot be determined from the return, attachments and/or schedules:
    • Illegible,
    • Missing,
    • Other than 9 digits
    •All zeroes, or
    •All nines,     		Unnumbered, Step 1 – Research IDRS,
    Step 2 – If found, edit to the proper location,
    Step 3 – If not found, route to Entity.
    Numbered, Step 1 – Edit an Asterisk (*) to the left and Line through the illegible EIN, or all zeroes, or all nines,
    Step 2 – Edit Action Code 320.
    “pending”
    , “applied for”
    , etc., is indicated in the EIN area,     		Unnumbered, Step 1 – Research IDRS,
    Step 2 – If found, edit to the proper location,
    Step 3 – If not found, route to Entity.
    Numbered, Edit Action Code 320.

  5. Be sure the EIN is entered on a Form 941, 941-PR, and 941-SS (Rev 2005 or subsequent) and Form 944, 944-PR, 944(SP), 944-SS;
    if page 1 and 2 are on a separate sheet; and the Schedule B or 945-A, matches the EIN in the entity area of the first page
    of Form 941 or 944. If the EIN does not match, Asterisk (*) to the left and line through the EIN and enter the last 4 digits
    of the correct EIN. Also, enter the last 4 digits, if there is no taxpayer entry.

  6. If a Form 941, 941-PR, 941-SS, 943, 943-PR, 944, 944-PR, 944(SP), 944-SS, 945 or CT-1 is received in Code & Edit with a EIN
    beginning with “69″
    , forward the return to Entity control for a new EIN.

    IF THEN
    Unnumbered, Step 1 – Attach Form 4227 with remarks “69 EIN – Issue new EIN.”

    Step 2 – Complete all editing before routing to Entity.
    Numbered, Step 1 – Edit Action Code 320.
    Step 2 – Attach Form 4227 with remark “69 EIN – Issue new EIN.”

    Step 3 – Complete all editing before routing to Entity and leave in batch.

  7. Listed below are the most common conditions indicating an entity change requiring a new EIN:

    1. Individual owner dies and estate takes over business,

    2. Individual owner dies, surviving spouse takes over when no estate is involved,

    3. Individual ownership changes to corporation,

    4. Individual ownership changes to partnership,

    5. Partnership changes to individual ownership or disregarded entity (except where the resulting owner already has an EIN),

    6. Partnership changes to corporation (except for elective change caused by Filing Form 8832),

    7. There is a sale or exchange of 50% or more of the interests in a partnership within a 12-month period,

    8. Corporation changes to individual ownership or disregarded entity (except where the resulting owner already has an EIN),

    9. Corporation changes to partnership (except for elective change caused by filing Form 8832),

    10. Disregarded entity changes its classification so that it is recognized as a separate entity, and the entity does not already
      have an EIN, or

    11. Individual has filed for bankruptcy, and shows “Receiver”
      , “Trustee”
      or “Debtor-In-Possession”
      in the entity area, signature line, or on an attachment).

    Note:

    If a non-preaddressed return indicates the taxpayer has filed for bankruptcy, (e.g. by showing “Receiver”
    , “Trustee”
    or “Debtor-In-Possession”
    in the entity area, on the signature line, or on an attachment of the return), then send the return to Entity Control.

    Exception:

    If the return provides an indication in the entity area that the return was filed by a Trust, in order to determine bankruptcy,
    review the return, attachments, etc. for the use of “Receiver”
    , “Debtor-In-Possession”
    , “Section 7″
    , etc. before sending to Entity Control. A Trust return being signed by a “Trustee”
    is not an indication of bankruptcy or a reason for these returns to be routed to Entity Control.

3.11.13.13.4 
(01-01-2009)
Entity Perfection – Tax Period – General

  1. All returns must have a tax period. If the return requires editing of the tax period it will be edited based on the form revision
    and the form type; quarterly or annual. Determine if the tax period must be edited using the rules for:

    1. Form 941, 941-PR and 941-SS (Rev. 2005 and subsequent),

    2. Form 941, 941-PR, and 941-SS (Rev 2004),

    3. Form 944, 944-PR, 944(SP), 944-SS,

    4. Form 943, Form 943-PR, Form 945 and Form CT-1.

    Note:

    If the taxpayer enters the due date of the return instead of the tax period ending date, perfect the tax period to reflect
    the tax period ending date.

    Note:

    Consider a “taxpayer indication”
    a notation on the return or an attachment to the return, placed by the taxpayer.

3.11.13.13.4.1 
(01-01-2009)
Entity Perfection – Tax Period – Form 941, Form 941-PR and 941-SS (Rev. 2008 and subsequent).

  1. Process Current Year Revision Form 941, 941-PR and 941-SS (Rev. 2009) as follows:

    IF AND THEN
    One tax period box is checked, There is no taxpayer indication on the return or attachments of another tax period, No editing is necessary.
    A tax period that agrees with the checked box has been edited on the return, No editing is necessary.
    There is a TAXPAYER indication of a tax period elsewhere on the return or attachment that does not agree with the check box, Edit the correct tax period on top of the “Report for this quarter…”
    box in YYMM format.
    The return has a Pre-printed label, No editing is necessary. The check box is showing the taxpayers intent. See Figure 3.11.13-15
    No tax period box is checked, Return has a Pre-printed label, “X”
    the box for the tax period indicated on the Pre-printed label (unless taxpayer has indicated a tax period different from
    the label). See Figure 3.11.13-16a. and b.
    Other than pre-printed label, Step 1 – Review the return and the attachments for the correct tax period,
    Step 2 – If found “X”
    the box for the tax period indicated on the return or attachments,

    Note:

    If there is an indication the taxpayer is filing a current revision form for a tax period other than a current processing
    YEAR tax period, follow the instructions below.

    Step 3 – If the tax period can not be determined, “X”
    the box indicating the current tax period being processed.

    There is an indication the taxpayer is filing a current revision form for a tax period other than a current processing YEAR
    tax period,     		  Edit the correct tax period on top of the “Report for this quarter…”
    box in YYMM format.

    Note:

    If the tax period is 200412 or prior, the return cannot be processed through SCRIPS. Pull and rebatch as ISRP.
    The return would otherwise be considered an early filed return, All three are present on the return:
    1 – Current Year Form revision,
    2 – 3rd or 4th quarter tax period box checked,
    3 – Tax Data appears on the return,     		Edit the year of the tax period to be the prior year (e.g. Current Year Form Revision 2009 edit the year to be 2008). Edit
    the tax period above the “Report for this Quarter”
    box in YYMM format. See Figure 3.11.13-17

    Caution:

    This type of return is typically seen during the 4th and 1st quarter return processing time frame, when the taxpayer has access
    to the latest revision of Form 941.

    More than one Tax Period box is checked,   Step 1 – Review the return and attachments for a taxpayer indication of the correct Tax Period,
    Step 2 – Edit the correct tax period on top of the “Report for this quarter…”
    box in YYMM format,
    Step 3 – If the tax period can not be determine, edit and process the return for the earliest Tax Period shown by the taxpayer.
    See Figure 3.11.13-18.

    Figure 3.11.13-15

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Preprinted Label and Tax Period Box Checked Showing Taxpayers Intent

    Figure 3.11.13-16

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Preprinted Label and Editing Tax Period from Information on Return – Tax Period Box Checked

    Figure 3.11.13-17

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Return Indicates an Early Filed Return, but there are Indicators on the Return that the Taxpayer is Filing a Current Year
    Revision of Form 941 for a 3rd or 4th Quarter Return of the Prior Year.

    Figure 3.11.13-18

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Multiple Tax Period Boxes Checked Requiring Editing of the Tax Period above the “Report for this Quarter Box..”

  2. Process Prior Year Revision Form 941, 941-PR and 941-SS (Rev. 2005 thru 2008) as follows:

    Note:

    If the tax period is 200412 or prior, the return cannot be processed through SCRIPS. Pull and rebatch to be processed through
    ISRP.

    IF AND THEN
    One tax period box checked, There is a taxpayer notation indicating a tax period in the current year, Edit the Form Title Year of the return to be current processing year (e.g. 2007 edited to be 2008). Editing of the tax period
    above the “Report for this Quarter”
    box is not necessary. See Figure 3.11.13-19.

    Exception:

    Do NOT change the Form Title Year if doing so will make the return an early Filed Return.
    One tax period box checked (pre-printed label),   Edit the tax period on top of the “Report for this quarter…”
    box in YYMM format, based on the Form Revision and the Tax Period check box.
    No boxes checked, The returns shows a Pre-printed label or there is a taxpayer indication on the return or attachments, Edit the correct tax period based on the information on the return or attachment on top of the “Report for this quarter…”
    box in YYMM format. See Figure 3.11.13-20.
    There is NO indication of a Tax Period on the return or attachments, Process as a current quarter, current year return. Edit the Tax Period on top of the “Report for this quarter…”
    box in YYMM format.
    More than one Tax Period box is checked,   Step 1 – Review the return and attachments for the correct Tax Period,
    Step 2 – If the tax period can not be determine, edit and process the return for the earliest Tax Period shown by the taxpayer,
    Step 3 – Edit the correct tax period on top of the “Report for this quarter…”
    box in YYMM format.

    Figure 3.11.13-19

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Prior Revision Form 941 (Rev. 2005 and Subsequent) with Taxpayer Indication Filed for a Current Quarter Return – Edit Form
    Title Year

    Figure 3.11.13-20

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 941 Revision 2006 requiring the Tax Period Edited Above the “Report For This Quarter”
    box.

3.11.13.13.4.2 
(01-01-2009)
Entity Perfection – Tax Period – Forms 941, 941-PR, and 941-SS (Revision 2004 and Prior) and Form 941CG

  1. Process Form 941, 941-PR and 941-SS Revision 2004 as follows:

    IF AND THEN
    The tax period is shown on the return or attachments,   Edit the tax period on top of the OMB box in YYMM format. See Figure 3.11.13-21a. and b.
    The tax period is missing, incomplete, or illegible,   Step 1 – Review the return and attachments for the correct Tax Period,
    Step 2 – If found, edit the correct tax period on top of the OMB box in YYMM format,
    Step 3 – If the tax period cannot be determined, edit the tax period for the current quarter being processed on top of the OMB box
    in YYMM format.
    More than one tax period is shown on the return,   Step 1 – Review the return and attachments for the correct tax period,
    Step 2 – If the tax period cannot be determined, edit and process the return for the earliest tax period shown by the taxpayer,
    Step 3 – Edit the correct tax period on top of the OMB box in YYMM format. See Figure 3.11.13-22.
    The taxpayer enters the due date of the return instead of the tax period ending date,   Perfect the tax period to reflect the tax period ending date.
    Processing Form 941CG,   Edit the tax period on top of the OMB box in YYMM format.

    Figure 3.11.13-21

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Preprinted Label and Non-Preprinted Label Requiring Editing of the Tax Period from Information on the Return – Tax Period
    edited above the OMB Box.

    Figure 3.11.13-22

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 941 With More Than One Tax Period Shown On The Return

3.11.13.13.4.3 
(01-01-2009)
Entity Perfection – Tax Period – Forms 944, 944-PR, 944(SP), and 944-SS,

  1. Process Form 944, 944-PR, 944(SP) and 944-SS as follows:

    IF AND THEN
    Return is for current processing year,   No editing is necessary.
    Return is for prior processing year,   Edit the tax period in “YY”
    format above the “Who Must File Form 944″
    . See Figure 3.11.13-23.

    Figure 3.11.13-23

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 944 with the Tax Period Edited above the “Who Must File Form 944″
    box

3.11.13.13.4.4 
(01-01-2009)
Entity Perfection – Tax Period – Forms 943, 943-PR, 945 and CT-1

  1. Process Form 943, 943-PR, Form 945 and Form CT-1 as follows:

    IF AND THEN
    The return entity shows only the current tax period, There is no other indication of a tax period on the return or attachment, No editing is necessary.
    The return shows only a prior tax period, There is no other indication of a tax period on the return or attachment, Edit the correct tax period in the upper right portion of the entity area in “YY”
    format. See Figure 3.11.13-24a.
    The taxpayer has notated on the return or attachment the correct tax period,   Edit the correct tax period in the upper right portion of the entity area in “YY”
    format. See Figure 3.11.13-24b.
    The tax period is missing, incomplete or illegible,   Step 1 – Review the return or attachments for the correct tax period,
    Step 2 – If found, edit the correct tax period in the upper right portion of the entity area in “YY”
    format,
    Step 3 – If the tax period can not be determined, edit the tax period as the current processing year tax period in the upper right
    portion of the entity area in “YY”
    format.
    More than one tax period is shown on the return,   Step 1 – Review the return or the attachments for the correct Tax Period,
    Step 2 – If the Tax Period can not be determined, edit and process the return for the earliest Tax Period shown by the taxpayer,
    Step 3 – Edit the correct Tax Period in the upper right portion of the entity area in “YY”
    format.
    The taxpayer enters the due date of the return instead of the tax period ending date,   Perfect the tax period to reflect the tax period ending date.

    Figure 3.11.13-24

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 943 with Tax Period Edited Above in the upper right portion of the entity area in YY format.

3.11.13.13.5 
(01-01-2009)
♦Entity Perfection – Domestic Addresses♦

  1. Perfection of the address is necessary when the mailing address (Street or P.O. Box) is not easily identified. For a list
    of correct street abbreviations, see Document 7475 (State and Address, Abbreviations, Major City Code (MCCs), Zip Codes, and
    Countries).

    Exception:

    Do not perfect the address on amended returns (e.g. CCC “G”
    ).

  2. If the return requires that the city, state, or ZIP Code be changed, edit by lining through the incorrect entry and enter
    the correction in the entity where space allows.

  3. The procedures for perfection of an address for pre-addressed returns indicating an address change and non-preaddressed returns
    are as follows:

    Note:

    The lined through address information will be input on IDRS before the return leaves Code & Edit.

    IF AND THEN
    The address contains information other than a street address or P.O. box,   No perfection is necessary. ISRP & SCRIPS will enter the complete address.
    There is an indication on an attachment that the address has been changed,   Edit the new address in the Entity section of the return.
    Form 8822 (Address Change Requested) is attached, Information is the same, Take no action.
    Information is different, Step 1 – Detach Form 8822,
    Step 2 – If needed, edit the address shown on the Form 8822 to the return,
    Step 3 – Route the Form 8822 to Entity Control.
    Both a P.O. Box and a street address are shown, See Figure 3.11.13-25 and See Figure 3.11.13-26.   Step 1 – Edit An Asterisk (*) to the left and Line through the street address,
    Step 2 – Notate “TC 016″
    in the upper left margin and route for input of a “TC 016″
    .
    The return does not have a pre-printed label and the address is a P.O. Box, The change of address box (Form 941 (revision 2004), 943, 943-PR, and 945) is checked, Step 1 – Edit TC 016 in the upper left margin,
    Step 2 – Process using local procedures.
    Two street addresses are shown,   Step 1 – Edit an Asterisk (*) to the left and Line through the second street address,
    Step 2 – Notate “TC 016″
    in the upper left margin and route for input of a “TC 016″
    . See Figure 3.11.13-27

    Note:

    The lined through address information will be input on IDRS before the return leaves Code & Edit.
    One street address is shown, The taxpayer changes the address to a P.O. box, Step 1 – Edit an Asterisk (*) to the left and Line through the street address, if the taxpayer has not already done so,
    Step 2 – Notate the “TC 016″
    in the upper left margin and route for input of a “TC 016″
    .
    The city and state are not shown on the return, but are shown on an attachment,   Edit the city and state on the form in the Entity section.
    The ZIP Code is missing or illegible, Is not available from the return or attachments, Determine the ZIP Code by using Exhibit 3.11.13-16. See Figure 3.11.13-28.
    Only the first three digits of the ZIP Code can be determined,   Edit “01″
    for the fourth and fifth digits.
    The address field is blank or incomplete,   Leave blank and allow to fallout to ERS.

    Note:

    Only research IDRS for an address if the return is being sent back to the Taxpayer for additional information.

    Note:

    Always edit an Asterisk to the left and line through the “in care of”
    symbol (“c/o”
    or “%”
    ) if it is present with an address. Do not use the ampersand (&) and the percent symbol (%) when editing address information.

    Figure 3.11.13-25

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Non-Preprinted Label with P.O. Box and Street Address – Edited to delete the street address

    Figure 3.11.13-26

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Preprinted Label – Street Address Change to P.O. Box Number

    Figure 3.11.13-27

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Two Street Addresses are Shown on the Return – Editing Required

    Figure 3.11.13-28

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Major City Address – Missing Zip Code

  4. An APO (Army Post Office) and FPO (Fleet Post Office) addresses are considered domestic addresses. If an address appears as
    APO or FPO convert based on the ZIP Code (i.e. If the address appears as APO New York, NY 091XX; convert to APO AE 091XX).
    See Figure 3.11.13-29 for an example of an edited APO/FPO address. Refer to Conversion Chart below:

    ZIP CODE CITY STATE COUNTRY
    34000-34049 APO AA Americas
    34050-34099 FPO AA Americas
    090XX-094XX and 096XX APO AE Europe
    095XXP FPO AE Europe
    962XX-965XX and 98700-98759 APO AP Pacific
    966XX and 98760-98799 FPO AP Pacific

    Figure 3.11.13-29

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Editing APO/FPO Address

3.11.13.13.6 
(01-01-2009)
♦Entity Perfection- Foreign Addresses (OSPC Only)♦

  1. A foreign (international) address is any address that is not in the 50 states or the District of Columbia.

  2. Returns with a APO or FPO address are considered domestic addresses. See IRM 3.11.13.13.5

    Note:

    All returns with a Foreign Address will be processed through ISRP. If the return is batched for SCRIPS processing, after editing,
    pull the return from the batch and request the return be batched for ISRP processing. If numbered take the necessary steps
    to cancel the DLN.

  3. Route returns with a foreign address to Ogden Submission Processing Center (OSPC) for processing. Prepare 86C letter to inform
    the taxpayer that the return has been sent to OSPC.

    Note:

    Form 941-PR, 941-SS, 943-PR, 944-PR and 944-SS received with a domestic address (address in the 50 states or the District
    of Columbia) should be processed as a Foreign Return. Do Not convert to a Domestic Return, unless directed by an attachment
    to the return.

  4. Returns with addresses in the following U.S. Possessions are considered to have a foreign address for processing purposes
    but are edited in the same way as a domestic address.

    1. A two-character alpha code must be edited for the country/possession/territory name:

      U.S. Possession Abbreviation
      American Samoa AS
      Federated States of Micronesia FM
      Guam GU
      Marshall Islands MH
      Northern Mariana Islands MP
      Palau PW
      Puerto Rico PR
      Virgin Islands (U.S.) VI

    2. A ZIP code must be present. Edit the appropriate ZIP code if not provided. See Exhibit 3.11.13-22.

  5. All other foreign addresses are edited the same as a domestic address with the following exceptions:

    1. The foreign country must be the last entry in the address.

    2. Circle out the foreign country and edit the foreign country code preceded by a “/”
      and followed by “/$”
      as the last entry in the address. See Exhibit 3.11.13-23 for official foreign country codes. See Figure 3.11.13-30 for
      an example of an edited return with a Foreign Address.

      Note:

      Submission Processing BMF Foreign Address Job Aid (Number 2324–002) provides examples for editing foreign addresses.

    3. If the foreign address is from Australia, Brazil, Canada, Cuba, Italy, Mexico, or the Netherlands, check if the address contains
      a province, state or territory name.

      IF THEN
      A province, state or territory is present, Step 1 – Circle out province, state or territory,
      Step 2 – Enter appropriate abbreviation. See Exhibit 3.11.13-24.
      A province, State or territory is not present, Continue editing the return.
      Province, state or territory is shown in abbreviated format, Continue editing the return.

    4. A ZIP code is not required on a foreign address. Foreign addresses use a postal code that is entered before the city or foreign
      country and is part of the address.

    Figure 3.11.13-30

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 941 with a Foreign Address

3.11.13.13.7 
(01-01-2009)
Employment Codes

  1. Form 941 and 944 entities on the BMF contain an employment code. Employment codes identify businesses which are other than
    normal business entities. Employment Codes may appear on a pre-addressed return label, or be displayed by some IDRS Command
    Codes (e.g. INOLE, BMFOL). See Figure 3.11.13-31 for the location of the Employment Code on an IRS issued label.

    Employment Code Employers Status Employment Code Numerical Equivalent Displayed By Some Command Codes Liable for Social Security or Medicare ?
    A A government agent acting as an Employer (Fiscal) Agent under IRC Section 3504.   Taxable on both Social Security and Medicare.
    C Church or church-controlled organization. 8 Exempt from both Social Security and Medicare.
    F Federal Employer. 6 May be exempt from Social Security. Medicare is taxable.
    G State/Local Government Agency- Employer not under Section 218 agreement and files Form 941. blank May be exempt from both Social Security and Medicare.
    I Indian Tribal Government. blank Taxable on both Social Security and Medicare.
    M Maritime Industry. 4 Taxable if working inside United States.
    May be exempt if working outside the United States.
    S Foreign Subsidiary (OSPC only)- Form 2032 filed. 2 Taxable on both Social Security and Medicare.
    T State/Local Government Agency- Employer under Section 218. 1 Taxable on both Social Security and Medicare.
    W Non-profit Organization- IRC 501(c)3 filer. 3 Taxable on both Social Security and Medicare.

    Figure 3.11.13-31

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Pre-Printed Label Showing the Location of the Employment Code

  2. Form 941 and 944 filers under Employment Codes “C”
    or “G”
    are exempt from Social Security and Medicare taxation. Form 941 filers under Employment Codes “F”
    are not exempt from Medicare taxation; only some are exempt from Social Security taxation.

    IF AND THEN
    No Social Security and/or Medicare tax is reported on Lines 5a and 5c, Columns 1 and 2 Form 941; Lines 4a and 4c, column 1
    and 2 Form 944, and line 2, Total Compensation ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ,     		Line 4 Form 941 or Line 3 Form 944 check box has an entry, Step 1 – Edit CCC”B”
    ,
    Step 2 – Continue to process.
    Line 4 Form 941 or Line 3 Form 944 check box does not have an entry, Step 1 – Review the return and attachments (Employers who quality for an Employment Code C, F, or G should have their Employment
    Code on the IRS issued label),
    Step 2 – If the Employment Code can not be determined from the return and attachments, research IDRS (e.g. INOLE/BMFOL) to determine
    the Employment Code. If the Employment Code cannot be determined, see step 4,
    Step 3 – If the Employment Code has been determined to be a “C”
    , “F”
    , or “G”
    edit a CCC B,
    Step 4 – If the Employment Code cannot be determined or the Employment Code is other than C, F, or G, edit the amount shown on Line
    2 to Line(s) 5a, and 5c. column 1 of Form 941 or Line 1 to Line(s) 4a and 4c column 1 of Form 944.

  3. All Employment Code “W”
    tax exempt organizations are liable for Social Security and Medicare taxes. If a Form 941 or 944 has been filed, but you
    cannot determine the proper amount(s) subject to tax:

    1. Initiate a Letter 21C to the taxpayer to determine the liability. Edit Action Code 211, as required.

    2. If the taxpayers response does not warrant exemption from Social Security and Medicare taxes or the taxpayer has not provided
      a figure(s) for:
      • Form 941 Lines 6a, 6c and 7a, (Rev 2004) or lines 5a through 5c (Rev 2005), then enter the line 2 amount on lines 6a and
      7a (Rev 2004) or lines 5a and 5c (Rev 2005).
      • Form 944 Lines 4a, 4b and 4c, then enter the Line 1 amount on Lines 4a and 4c.

  4. Examples of statements a tax exempt organization may cite for not computing the tax in a quarter are:

    • “Maximum social security taxes paid in previous quarter”

    • “Minister”

    • “United Transportation Union”

    • “Children under 18 years old”
      and

    • “Common paymaster”
      .

3.11.13.14 
(01-01-2009)
Form 941, Employers QUARTERLY Federal Tax Return, Form 941-PR, Planilla para la Declaración Federal TRIMESTRAL del Patrono
and Form 941-SS, Employers QUARTERLY Federal Tax Return – General

  1. There are three types of tax reported on Form 941:

    • Income Tax Withholding tax will be reported on Form 941;

    • Medicare tax will be reported on Form 941, Form 941-PR and Form 941-SS; and

    • Social Security tax will be reported on Form 941, Form 941-PR and Form 941-SS.

  2. Domestic and Foreign consideration of Forms 941:

    1. Domestic –
      • Form 941: Employers whose principal place of business is in the U.S.
      • Form 941: with a foreign (international) address that is not in the 50 states or the District of Columbia (OSPC ONLY – WITH
      FOREIGN ADDRESS ONLY).

    2. Foreign (OSPC Only) –
      • Form 941-PR : Employers whose principal place of business is in Puerto Rico.
      • Form 941-SS: Employers whose principal place of business is in American Samoa, Guam, the Commonwealth of the Northern Mariana
      Islands, and U.S. Virgin Islands.

  3. Foreign Return Processing:

    1. All Forms 941 with a foreign address or an address of an U.S. possession, 941-PR, and 941-SS, should be processed at the Ogden
      Submission Processing Campus (OSPC). If these returns are received in any other Submission Processing Campus, they must be
      transshipped to OSPC. Army Post Office (APO) and Fleet Post Office (FPO) are not considered foreign addresses.

      • If the return is unnumbered, withdraw it from the batch and prepare Form 13195 requesting the Letter 86C be sent to the
      taxpayer. Attach a Form 4227 for routing to OSPC.
      • If the return is numbered, use AC 650.

    2. Forms 941-PR, and 941-SS, are similar to the regular returns. However, they contain Social Security and Medicare tax only.
      Therefore, the line numbers must be the same as the domestic returns. If they are not, alter the numbers to make them compatible
      with the transcription lines for the current revision of Form 941.

    3. Withheld Income Tax should not be reported on these returns. However, certain filers may have employees who are subject to
      the income tax withholding. If such filers include the income tax withholding and/or income tax withholding adjustments on
      the returns (such as showing the amounts in the shaded areas):

      Note:

      The following procedures will change the Filing Requirement from a Form 941-PR, or 941-SS, to a Form 941 filer. Care should
      be taken before entering this change

      :
      • Code a numbered return with AC 620 for Reject processing.
      • Prepare a substitute return for the erroneous U.S. possession return if the return is unnumbered.
      • Prepare and release promptly a Form 2363, (Master File Entity Change), to change the BMF filing requirement code from “6″
      or “7″
      to “1″
      .

    4. Otherwise, the instructions provided for the regular returns (i.e. Form 941, 943, 944 or 945 returns filed with foreign or
      U.S. possession addresses) should be followed to the extent possible to process these returns. Specific procedures for these
      returns are:
      • An address change may be made on the returns if it will not change the Filing Requirement Code from “6″
      to “7″
      or “1″
      , or from “7″
      to “1″
      or “6″
      . Otherwise, a Form 2363 must be prepared showing TC 013.
      •See IRM 3.11.13.13.1 for instructions to follow regarding the Name Control and see the Name Control Job Aide, Document 7071A for determining a Name Control .

    5. A Social Security/Medicare Tax adjustment ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ must be substantiated by an attachment in English. A foreign
      language attachment is acceptable if the adjustment has been previously approved by an interpreter or the attachment contains
      an English translation. Code the return with AC 360 for routing to the interpreter, if necessary.

    6. Do not send these returns back for missing signature on Form 6800A or Notice 695. Instead, initiate letter 21C.

  4. Non-payroll items including backup withholding and withholding for pensions, annuities, gambling winnings, IRAs, 401K, military pensions, etc.
    should be reported on Form 945, Annual Return of Withheld Federal Income Tax. See IRM 3.11.13.25 for more information on Form
    945.

    IF AND THEN
    There are entries on only lines 3, 8, 10, 11 or 12 or only line 2, There is an indication the taxpayer is filing for Non-Payroll items. (e.g. the entity name contains such references as Employee
    Pension Plan, Pension, 401K Plan, Profit Sharing Plan, Retirement Fund, Lottery, IRAs, Annuity, etc.,     		Step 1 – Correspond to determine the taxpayers intent,
    Step 2 – If their reply indicates that they should have filed and reported the entries on a Form 945, route the Form 941 to Accounts
    Management on Form 3465 with notation “NON-PAYROLL ON FORM 941″
    ,
    This procedure will advise Accounts Management to delete the filing requirements for the Form 941 and establish new filing
    requirements for Form 945;
    And to post any payment(s) to the correct module (e.g. Form 945 tax period) and to return the Form 941 to the taxpayer, with
    a letter, to explain how they must now report their tax.
    Caution: If it can be determined the taxpayer has a “non-qualified plan”
    , correspond with the taxpayer explaining that it was a wage deferred plan subject to wage withholding and must be reported
    on Form 941.
    For an explanation of non-qualified plan, see #5 below.

  5. “Non-qualified”
    Plans     – Certain companies (for example, Life Insurance Companies) sell annuity contracts to participants in “non-qualified”
    plans or deferred compensation plans. Distribution of these contracts are payments of deferred wages subject to withholding
    and reportable on Forms W-2 and 941.

    1. If the taxpayer notates on a Form 941 in the left margin, or you are able to determine that it is a “non-qualified plan”
      , edit CCC “B”
      on the return and continue to process.

  6. The bottom portion of the Form 941 contains a payment voucher. If the voucher shows a money amount, Receipt and Control (Deposit)
    or an alternate lockbox site detaches the voucher for proper payment processing. However, if Code & Edit discovers a voucher
    with a money amount present or blank, it may be detached and disposed.

  7. State and local governments who will file for household employees on Form 941 will write across the top of the Form 941, “Household
    Employer Agent”
    , “Fiscal Agent”
    , “Home-Care Services”
    , or “Chore workers”
    . Returns with these statements must be given a CCC “J”
    .

3.11.13.15 
(01-01-2009)
Form 941, 941-PR and 941-SS (Rev. 2005 and subsequent) Return Perfection and Line Editing

  1. All Forms 941 with a Foreign Address, Form 941-PR and Form 941-SS will be processed through ISRP. If the return is batched
    to be processed through SCRIPS, take the following action:

    IF THEN
    Numbered Batch, Edit Action Code 460.
    Unnumbered Batch, Pull from batch, and request the return be merged into a batch that will be processed through ISRP

    Note:

    A Composite Form 941 with Form(s) 941-M attached must be processed through ISRP. This is to ensure that the 941-M is not detached
    from the Composite Form 941.

  2. Perfection procedures for each field of the entity on Form(s) 941, 941-PR and 941-SS may be found in IRM 3.11.13.13.

  3. All Forms 941 (Rev 2005 and subsequent) returns with a domestic address must be edited and processed through SCRIPS. These
    returns are batched and prepared separately as either “Perfects”
    or “Imperfect”
    .

    1. “Perfects”
      - Returns with no attachments such as envelopes, letters, copies of notices with a taxpayer reply, internal forms for processing
      or routing, etc.

    2. “Imperfects”
      - Returns with attachments (including returns with Form 4227, Intra-SC Reject or Routing Slip.)

  4. SCRIPS Form 941 returns (Rev 2005 and subsequent), must be prepared as follows:


    1. Perfects Only – Carefully
       remove all staples. It is permissible to cut off the left corner of the return providing no identifying information is damaged or lost (e.g. the return year, entity information, etc.).

    2. Repair any large staple holes, rips and tears on the top and right hand side of the return.

    3. If the EIN is missing on page 2 (i.e. one sided documents) and/or Schedule B, edit the last four digits of the EIN in the
      EIN field.

      Note:

      If the return is damaged or print is too light (hard to read); pull the return from batch and request the return be re-batched
      as “OE PAPER”
      .

    4. “Perfects”
      and “Imperfects”
      :

      IF Then
      The taxpayer completes the Form 941 (Rev 2005 and subsequent) information using red, orange, or pink ink, Batch and process the return as “Imperfects”
      . Photocopy the return to allow for processing through SCRIPS. Consider the original Form 941 as an attachment and request
      the document be merged into an “Imperfect”
      batch.
      The signature ONLY is in red, orange or pink ink, Edit an Asterisk (*) in the left most position of the “Sign your name here”
      box.
      A Composite Form 941 (Rev 2005 and subsequent) return, with Form 941-M returns attached, Batch and process through ISRP.
      A page 1 (one sided) Form 941 (rev. 2005 and subsequent) is missing, • Follow local procedures to reduce the chance of duplicating letters being sent to the taxpayer. Use tools such as IDAP and
      IDRS (Command Codes BMFOL and ERVIN) and request page 2 be associated with page 1 when possible.
      • If it is not possible to associate:
      1) – Insert a blank copy of page 1,
      2) – Edit from page 2:

      1. Taxpayers Name (If Name only research for EIN).

      2. EIN (If EIN only research for Name).

        Note:

        If Name and EIN field are blank on page 2; use the information from the envelope (if available) to research. If research cannot
        be performed to obtain entity information give to lead for disposition (If there is a legible signature, route to Entity for
        research).

      3. Tax Period (Edit the tax period in the following priority):
        • Schedule B, if applicable,
        • Current Tax Period.

      4. Address (Edit in the following priority):
        • From the envelope if name match.
        • Leave blank and allow to fall out to ERS.

      Note:

      If research is being performed in b) above obtain address information also.

      3) – Edit a Received Date as necessary,
      4) – Edit Action Code 211 and Correspond for Missing Page 1 (Refer to Form 13195).

      A page 2 (on one sided) Form 941 (Rev 2005 and subsequent) is missing, • Follow local procedures to reduce the chance of duplicating letters being sent to the taxpayer. Use tools such as IDAP and
      IDRS (Command Codes BMFOL and ERVIN) and request page 1 be associated with page 2 when possible.
      • If it is not possible to associate:

      1. Insert a blank copy of page 2 behind the taxpayers page 1,

      2. Edit last 4 digits of EIN to page 2,

      3. Edit SIC”1″
        ,

      4. Use Action Code 211 to correspond for Page 2 and signature.
      The taxpayer encloses a duplicate page 2 (on a one sided or duplex return), Consider the extra page as an attachment and request the document be merged into an “Imperfect”
      batch.
      Line through (/) the duplex page 2.
      The taxpayer used only page 1 of a duplex (two sided) return and a separate page 2, 1) Photocopy the original page 1,
      2) Line through (/) the original duplex page 1 and duplex page 2, this now becomes an attachment,
      3) Request the document be merged into a SCRIPS “Imperfect”
      batch.
      Taxpayer used only page 2 of a duplex (two sided) return and a separate page 1, 1) Photocopy the original page 2,
      2) Line through (/) the original duplex page 1 and duplex page 2, this now becomes an attachment,
      3) Request the document be merged into a SCRIPS “Imperfect”
      batch.

  5. Code and Edit examiners should ensure the jurat and authorized signature are shown and are in the proper location on the return.
    See IRM 3.11.13.12.7 for Signature editing procedures.

  6. When Code and Edit examiners review SCRIPS Form 941 returns, they should determine:

    IF THEN
    SCRIPS Form 941 (Rev 2005 and subsequent) with attachments was incorrectly assigned to a “Perfect”
    batch,     		Pull the return from the batch and request it be merged into an “Imperfect”
    batch, unless it can be made “Perfect”
    .
    SCRIPS Form 941 (Rev 2005 and subsequent) has no attachments and was incorrectly assigned to a “Imperfect”
    batch, Or an attachment has been removed and has made the return “Prefect”
    ,     		Move the “Perfect”
    return to the front of the batch

  7. Foreign Form 941, 941-PR and 941-SS Code and Edit should edit on the return the required information in the designated location.
    See Exhibit 3.11.13-1 for the transcription lines of Form 941, (Rev 2005 and subsequent). See Exhibit 3.11.13-2 for the transcription
    lines for Form 941-PR. See Exhibit 3.11.13-3 for the transcription lines for Form 941–SS.

  8. SCRIPS Form 941 (Rev 2005 and subsequent), Code and Edit should edit on the return the required information in the designated
    location and for the transcription lines of Form 941, (Rev 2005 and subsequent).

  9. After editing, Form 941, 941-PR and 941-SS, Schedules and attachments should be in the following sequential order when placed
    back in the batch:

    1. Form 941, 941-PR and 941-SS, Page 1,

    2. Form 941, 941-PR and 941-SS, Page 2,

    3. Schedule B, Report of Tax Liability for Semi-weekly Schedule Depositors, if applicable,

    4. Attachments, if applicable.


    This will assist SCRIPS and ISRP during data transcription.

  10. Always edit money amounts in DOLLARS and CENTS.

  11. Editing is not required for any amount less than $1.00.

  12. Any line with an incorrect entry should be edited with an Asterisk (*) and moved to the correct line.

    Note:

    If line 10 (Rev. 2005 and subsequent) shows a negative or minus entry on a large dollar ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ return,
    check the Schedule B to determine if it is the same amount. If so, treat the entry on line 10 (Rev. 2005 and subsequent) as
    a misplaced entry and enter the amount on line 11 (Rev 2005 and subsequent). If not, consider the entry as an excess of Advance
    Earned Income credit. Asterisk (*) the entry on line 10 (Rev 2005 and subsequent), and enter the total tax amount from line
    8 (Rev 2005 and subsequent). Calculate the difference between the amounts of lines 8 (Rev 2005 and subsequent) and 10 (Rev
    2005 and subsequent), and enter the result to line 11 (Rev 2005 and subsequent).

  13. Verify all negative, minus, or subtracted amount.≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

  14. If any transcription line entries are illegible, place an Asterisk (*) to the left of the taxpayers entry and enter the correct
    amount to the left of the Asterisk.

  15. Code and Edit Tax Examiners should edit the correct line number for any return line which is unnumbered. Edit the line number
    to the left of the taxpayer or edited entry. Also, on Schedule B, if any daily box with an entry is unnumbered, Code and Edit
    should edit the applicable number for that box.

  16. If Form 2848 or 8821 is attached, See IRM 3.11.13.9 (Attachments to Documents) for detaching procedures.

  17. Form 941 has been changed to Form 944, by crossing out 941 and writing 944 on the return. Research (INOLE) to determine the
    correct filing requirement for the taxpayer.

    Note:

    Follow these procedures when a Form 944 is received in Document Perfection with instructions to process as Form 941.

    IF AND THEN
    Research provides filing requirement, Filing requirement is for Form 941, Process return as a Form 941
    Filing requirement is for Form 944, Process return as a Form 944. Asterisk (*) Line 1 and renumber the remaining T lines.

    Note:

    Lines 7a, 7b and 7c for Form 941 correlate with line 6a of Form 944. Compute and enter on renumbered “6a”
    .

    Research does not provide filing requirement,   Process return as a Form 941.

  18. Edit CCC “P”
    on a current year, current quarter return when:

    • The form identification number located in the top right margin of page 1 begins with “95″
      or “96″
      . See Figure 3.11.13-32

    • The form has the unique identifier of “(77)”
      in the top left margin next to the literal “Internal Revenue Service”

    • The taxpayer is requesting a tax package for the return being filed

    Note:

    Do Not edit CCC “P”
    if the return is amended, final or prior tax period.

    Figure 3.11.13-32

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Form 941 Requiring Editing of CCC “P”

3.11.13.15.1 
(01-01-2009)
Line 1, Number of Employees Receiving Wages ,Tips, or Compensation (Rev 2005 and subsequent) -

  1. Perfect for validity only. All alpha words must be written in numeric form. Edit an Asterisk (*) to the left of the entry
    and edit the correct number to the left of the Asterisk (*).

    Note:

    If illegible, edit to be non-transcribeable by placing an Asterisk (*) to the left of the entry.

    Exception:

    Notations of “zero”
    , “none”
    and “blank”
    do not need to be converted to a numeric equivalent.

3.11.13.15.2 
(01-01-2009)
Line 2, Wages, Tips, and Other Compensation (Rev 2005 and subsequent) (Domestic Only) -

  1. Process line 2 as follows:

    IF AND THEN
    Note: All line references refer to Form 941, Rev 2005 and subsequent.
    An entry appears on line(s) 5a, 5b, or 5c (Columns 1 or 2),   There must be an entry on line 2. Edit an entry to line 2 as required based on the available information on the return or
    on any attachment(s).
    Line 2 is zero, “none”
    , or blank,     		Line 5c, Column 1 has an entry (greater than zero or “none”
    ),     		Edit line 5c, Column 1 amount to line 2. See Figure 3.11.13-33
    Lines 2, and 5a (Column 1 or 2), 5b (Column 1 or 2), or 5c (Column 1 or 2) are blank, Only line 3 is completed, Step 1 – Review the return and attachments for an indication why the lines are blank,
    Step 2 – If none, correspond with the taxpayer for lines 2 and 5a, 5b, and 5c. See IRM 3.11.13.6 before corresponding,
    Caution: DO NOT correspond for line(s) 2, 5a, 5b, or 5c if there is a definite indication tax was withheld:
    • From only third-party sick pay,
    • From supplemental unemployment,
    • When there is an indication that the wages are exempt from Social Security and/ or Medicare by an entry in the check box
    on line 4. If so, edit CCC B.
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ There is no significant entry on lines 5a, 5b, or 5c. column 1 or 2, Do not correspond for Social Security/Medicare wages.

    Figure 3.11.13-33

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Edit Line 2 when blank and Line 5c has an entry

3.11.13.15.3 
(01-01-2009)
Line 3, Total Income Tax Withheld from Wages, Tips, and Other Compensation (Rev 2005 or subsequent) (Domestic Only)

  1. Perfect this line for validity. Ensure all entries are numeric in dollars and cents. If the taxpayer has entered dollars only,
    examiners do not have to correct the entry to dollars and cents.

  2. Do not change the entry on this line unless you are able to identify from the return or an attachment that the amount shown
    on the line is the difference between the correct income tax withheld for the quarter and an adjustment.

    1. If an adjustment is included with the entry on line 3, edit an Asterisk (*) to the left of the amount.

    2. Edit the correct amount of income tax withheld to line 3, left of the Asterisk.

    3. Show the income tax withheld adjustment (increase or decrease) on line 7d.

3.11.13.15.4 
(01-01-2009)
Form 8274, Church Exempt from Social Security and Medicare Taxes -

  1. Churches and qualified church-controlled organizations opposed to the payment of Social Security and Medicare taxes for religious
    reasons may elect exemption from the payment of the employers share of these taxes. However, Form 8274, Certification by Churches
    and Qualified Church-Controlled Organizations Electing Exemption from Employer Social Security and Medicare Taxes, must be
    filed with the Entity function at the Ogden Submission Processing Center.

  2. The electing organization must continue to withhold Federal income tax on wages, tips, and other compensation, and to report
    this income and the tax withheld on Form W-2, Wage and Tax Statement. The organization must also file Form 941 to report both
    the wages covered by the election and the wages of any employees engaged in unrelated business activities whose wages are
    not covered by this election and are subject to employer taxes.

    1. The electing church or organization can permanently revoke the election by paying Social Security and Medicare taxes for wages
      covered under the election. If the taxpayer files a Form 941 indicating that the election is being revoked, send to Entity
      Control for filing requirement change.

    2. The IRS will permanently revoke the election if the organization does not file Form W-2 for two or more years and does not
      provide the information within 60 days after a written request by the IRS.

  3. If a Form 941 is received with no entries on lines 3 through 7b and the taxpayer either has attached a letter to the return
    protesting the tax on religious grounds or has written his protest on the return, then send the return to the Entity Control
    function with a request to research for a Form 8274.

  4. If a Form 8274 is attached to a timely filed Form 941 (with or without entries in lines 3 through 7b):

    1. Detach Form 8274 and notate on the form, “Detached from return with Church FICA issue.”
      Forward the Form 8274 to:

      Ogden Submission Processing Center
      Entity Control
      Ogden, UT 84201-0027

    2. Notate on the returns left margin, “F8274 to ECU”
      and process the return without any Social Security or Medicare wages being shown on the applicable lines.

3.11.13.15.5 
(01-01-2009)
Form 941 with Notation, “Church FICA Issue”
-

  1. The churches with the notation, “CHURCH FICA ISSUE”
    did not elect the exemption from Social Security tax permitted by IRC Section 3121(w).

  2. These taxpayers are forever barred from filing Forms 8274. The wages must be reported on Form 941.

  3. Process a Form 941 with the notation “Church FICA Issue”
    as follows:

    IF THEN
    Note: All line references refer to Form 941, Rev 2005 and subsequent
    There are no entries on Form 941, lines 3 through 5c, column 1 and 2, Step 1 – Review the return to determine if there is an entry in the line 4 check box,
    Step 2 – If so, edit CCC “B”
    .
    If there is no entry on line 4 check box, correspond with the taxpayer for the amount of Social Security wages since they
    are fully taxable,
    Step 3 – If no reply, enter the line 2 amount to column 1 line(s) 5a and 5c. Also enter CCC “3″
    (if the return reflects a refund) and CCC “X”
    in the appropriate location,
    Step 4 – If there is no dollar entry only on column 1 and 2 line 5c, enter CCC “B”
    ,
    Step 5 – Edit SIC 3 on the return,
    Step 6 – If Form 8274 is attached to the return, See IRM 3.11.16.15.5 for procedures and continue to process the return.

3.11.13.15.6 
(01-01-2009)
Line 4, Total Social Security and Medicare Wages Exempt

  1. Follow the procedures below for the box on line 4:

    IF AND THEN
    Note: All line references refer to Form 941, 941-PR and 941-SS (Rev 2005 and subsequent)
    The box on line 4 is checked,   Edit CCC “B”
    Continue to process. See Figure 3.11.13-34.
    The box on line 4 is
    not
     checked,     		Column 1, lines 5a, 5b, and 5c are blank, dash or “None”
    , but Column 2, lines 5a, 5b, and 5c show entries     		See IRM 3.11.13.15.7 for Instructions for computing 5a, 5b and 5c Column 1.

    Figure 3.11.13-34

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Box on Line 4 is Checked, edit CCC B

3.11.13.15.7 
(01-01-2009)
Line 5a, (Column 1), 5b, (Column 1), and 5c, (Column 1), Taxable Social Security Wages or Tips and Taxable Medicare Wages
(Rev 2005 and subsequent)

  1. Process lines 5a (Column 1), 5b (Column 1) and 5c (Column 1) as follows:

    IF AND THEN
    Note: All line references refer to Form 941, 941-PR, and 941-SS (Rev. 2005 and subsequent)
    An entry appears on line(s) 5a (Column 2), or 5b (Column 2), and/or 5c (Column 2), but no entry appears on line(s) 5a (Column
    1), 5b, (Column 1) or 5c (Column 1),     		  Step 1 – Take the tax amount reported in column 2, lines 5a, 5b, and/or 5c and:
    • Multiply it by the appropriate factor in the table in See Exhibit 3.11.13-18., or
    • Divide the tax amount by the sum of the Social Security tax rate (.124) and Medicare rate (.029).
    • Enter the result on the appropriate wage or tip line(s). Also enter the line 5c, Column 1 results on line 2, if blank.
    See Figure 3.11.13-35,

    Note:

    Factor back before using line 2.

    Step 2 – Review the return and attachments to determine the correct amount for column 1, line(s) 5a, 5b, or 5c,
    Step 3 – If available, edit the correct amount for column 1, line(s) 5a, 5b, or 5c,
    Step 4 – Continue to process the return.

    An identical entry appears on column 1 for lines 5a, 5b, and 5c, Asterisk (*) to the left (*) the amount on line 5b.
    An entry has been made on column 1, line 5b, but no tax has been entered in column 2, line 5b, Step 1 – Review the return (including the entity) and attachments,
    Step 2 – Compare the column 1, line 5b entry to the entries on line(s) 3 (Domestic Only), 5a, 5c, 5d, 8, and 10, as applicable,
    Step 3 – If the line 5b entry is equal to an amount on one of the lines referenced in Step 2, or if the box on line 4 is checked,
    delete the entry in column 1, line 5b. Place an Asterisk (*) to the left of the entry,
    Step 4 – If the column 1, line 5b entry is not equal to an amount for the lines referenced in Step 2, and the box on line 4 is not
    checked, continue to process the return.
    Lines 5a, 5b, and 5c, Columns 1 and 2 are blank, zero, or “None”
    ,     		Line 2 has an entry ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ (Domestic Only), or processing a foreign return, Step 1 – If the box on line 4 is checked, edit CCC B and continue to process the return,
    Step 2 – Review the return and any attachments to determine if the taxpayer is claiming to be “exempt”
    from Social Security and Medicare tax. Edit CCC “B”
    and continue to process the return, if the taxpayer claims to be exempt, by indicating:
    • The maximum Social Security tax has been paid
    • Wages for children under 18 years old
    • Minister wages
    • Railroad
    • United Transportation Union
    • Non-qualified Plan (Section 457 plan)
    • Church FICA issue
    • Foreign Employer with US employee

    Caution:

    Review any attachment closely for an indication of exempt from Social Security and Medicare when processing a foreign return.

    Step 3 – Review the return for an Employment Code of C, F or G on the IRS label (See Figure 3.11.13-31 for the location on an IRS
    issued label). If the Employment Code is a C, F or G, edit a CCC “B”
    , and continue to process the return,
    Step 4 – If the Employment Code cannot be determined research IDRS (e.g. INOLE), to determine the Employment Code. If the Employment
    Code is other than C, F or G, edit the amount shown on Line 2 to Line(s) 5a and 5c, Column 1 and continue to process the return.

    Lines 5a or 5b, column 1 shows a negative entry, No Form 941c or supporting statement for negative amount is attached, Asterisk (*) to the left the negative amount and edit as a positive entry, left of the Asterisk.

    Note:

    This will cause a math error notice to generate to the taxpayer.
    Form 941c or supporting statement is attached, Step 1 – Asterisk (*) the negative or minus entry on line(s) 5a or 5b, column 1.
    Step 2 – Enter the negative entry from line(s) 5a or 5b, column 2 to line 7e. If line 7e all ready has en entry, add the two amount
    (i.e. the negative entry on line 5a or 5b, column 2 plus line 7e) together and enter the new amount on line 7e.
    Social Security wages are shown on column 1, line(s) 5a or 5b, but columns 1 and 2, line 5c are blank, zero, dash, or “None”
    ,     		The box on line 4 is not checked, (i.e. indicating wages are not subject to Social Security and/or Medicare tax)

    Note:

    If the line 4 box is checked, See IRM 3.11.13.15.4 (Form 8274 Church Exempt from Social Security and Medicare Taxes),

    		 Domestic Only:
    Step 1 -Enter the line 2 amount to column 1, line 5c,
    Step 2 – Continue to process the return.
    Foreign Only:
    Step 1 – Add column 1 line(s) 5a and 5b, and enter amount on line 5c, column 1,
    Step 2 – Continue to process the return.
    Social Security wages are shown on column 1, line(s) 5a or 5b, but column 1, line 5c is blank, zero, dash, or “None”

    		 There is an entry on column 2, line 5c, Step 1 – Divide the tax amount by the Medicare rate (.029). See Figure 3.11.13-36.
    Step 2 – Edit the result to column 1, line 5c.
    Step 3 – Continue to process the return.
    Line 5d is blank, There are entries (or an entry) in column 2 of lines 5a, 5b, or 5c, Add the entries from column 2 , lines 5a, 5b, or 5c and enter the calculated result on line 5d.
    There is no significant entry on lines 5a, 5b, or 5c. Line 2 has an entry of ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ , Do not correspond for Social Security/Medicare wages.

    Figure 3.11.13-35

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Perfecting Wage and/or Tip Data

    Figure 3.11.13-36

    This image is too large to be displayed in the current screen.

    Please click the link to view the image.

    Perfecting Line 5c, Column 1 from Line 5c, Column 2 information

  2. Domestic Only – If the taxpayer indicates they employ family members, and the line 2 entry represents the amount of their
    wages, but column 1, lines 5a and column 1, 5c does not show an entry, then edit the line 2 amount to column 1, line 5a and
    5c. DO NOT CORRESPOND.

  3. IRC Section 3127 contains a provision which allows an employer who is a member of a recognized religious sect or division as described on
    Form 4029, and to who adheres to its established tenets or teachings, to elect to be exempt from Social Security and/or /Medicare
    tax, but not from income tax. However, Form 4029, Application for Exemption from Social Security and Medicare Taxes and Wavier
    of Benefits, must be filed with and approved by the Social Security Administration. If the taxpayer has indicated, “Form 4029
    Exempt”
    , or “Form 4029 Applicable”
    in the blank area or above line 5a, do not question the difference between the Total Compensation line and taxable Social
    Security/Medicare wages.

3.11.13.15.8 
(01-01-2009)
Line 6, Total Taxes Before Adjustments (Domestic Only)

  1. Line 6, Total Taxes Before Adjustments, should be the sum of lines 3 and 5d.

  2. Though line 6 is not a T-line, it may be necessary to compute this line in the following instances:

    IF THEN
    Line 6 is blank, Compute only if needed to verify the line 7h and/or to compute the line 8 amount.
    Line 6 contains an entry, Accept the taxpayers entry. Use the taxpayers entry, if needed, to verify the line 7h amount and/or to compute the line 8 amount.

    Note:

    Do not compute line 7h if blank, from lines 7a through 7g.

3.11.13.15.9 
(01-01-2009)
Line 7, Tax Adjustments – General

  1. (Rev. 2009 and Subsequent) Entries on line 7a through 7c represent adjustments (e.g. Fractions of cents, Sick Pay, Group Term
    Life Insurance or Tips) to the net tax of the Form 941 being filed.

  2. (Rev 2005 through 2008) Entries on lines 7a through 7g represent adjustments (e.g. Fractions of cents, Sick Pay and Group
    Term Life Insurance or Tips, Federal Income Tax Withholding, Social Security and Medicare Tax, etc.) to the net tax of the
    Form 941 being filed.

  3. If an examiner enters an amount to one of the adjustment lines, the entry should be in dollars and cents. However, if a taxpayers
    entry is in dollars only and is correct, the examiner should not re-enter the amount to dollars and cents.

3.11.13.15.9.1 
(01-01-2009)
Line 7a, Fractions of Cents, (Rev 2005 or subsequent)
Line 7b, Sick Pay, (Rev 2005 or subsequent)
Line 7c, Adjustments for Tips and Group-Term, (Rev 2005 or subsequent)

  1. Entries on lines 7a, 7b, or 7c can be positive, negative or minus amounts.

  2. An entry on line 7a, 7b, or 7c do not require a Form 941c or supporting statement for substantiation. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ Therefore, accept the taxpayer’s entry. Do not edit CCC “C”
    if an explanation for any entry on these lines is not attached.

    Note:

    If Form 941-X is attached to Form 941, See IRM 3.11.13.18 for processing procedures.

    Figure 3.11.13-37

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    Please click here for the text description of the image.

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

  3. Accept a Social Security tax adjustment on line 7b identified as “sick pay”
    or “disability payment”
    (Form 941c is not needed). The employer will show the employers share of Social Security tax paid by a third-party. If
    the return is being filed by the third-party payer, the employers share of Social Security tax on sick pay will be shown
    on line 7b.

  4. If an examiner enters an amount to line(s) 7a through 7c, they should enter it in dollars and cents. However, if a taxpayers
    entry is correct and in dollars only, the examiner should not re-enter the amount in dollars and cents.

3.11.13.15.9.2 
(01-01-2009)
Line 7d, Current Year Federal Income Tax Withholding (Domestic Only) (Rev. 2005 through 2008)

  1. A taxpayer may show an adjustment to correct an error made in:

    1. A prior quarter(s) in a different tax year(s), or

    2. A preceding quarter of the same tax year.

  2. See IRM 3.11.13.18, 94X Adjusted Return Procedures, when:

    • A prior year revision (2008 and prior) filed for a 2009 and subsequent Tax Period showing an amount on Line 7d

    • A 2009 and Subsequent Revision Form 941 with Form 941c attached

    • Form 941 with a Form 941-X or 941-PR X attached

  3. Entries on line 7d can be positive, negative or a minus (-) amount.

  4. Perfect line 7d as follows:

    IF AND THEN
    Note: All line references refer to Form 941, 941-PR, 941-SS (Rev 2005 and subsequent).
    The taxpayer has an entry on line(s) 7d, 7h and 8, is a decrease, negative or minus amount, Process the adjustment using the procedures in (5) below.
    The taxpayer has an entry on line(s) 7d, 7h and 8, if an increase amount, Process the adjustment using the procedures in (6) below.
    The taxpayer has met all of the following conditions:

    • Entered the same amount on line(s) 3 and 7d,

    • Provided no explanation or substantiation for the entry on line 7d, and

    • The entry on Line 7d is not included on Line(s) 7h or 8, or line(s) 7h or 8 are blank,

    		   Consider the entry on line 7d as an incorrect entry. Place an Asterisk (*) to the left of entry and continue to process the
    return.

    Note:

    If line 7e also contains a decrease, negative or minus amount to adjust tax on social security or Medicare wages (for any
    tax period) which is not explained or substantiated (i.e. Form 941c is not attached), then also edit CCC C. See IRM 3.11.13.11.2.
    for CCC “C”
    procedures.

  5. Process a decrease in Federal Income Tax Withholding to correct errors as follows:

    IF AND THEN

    Note:

    All line references refer to Form 941, 941-PR and 941-SS (Rev 2005 and subsequent)
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ The taxpayer has NOT provided a Form 941c or supporting statement, or there is no explanation for the adjustment, Accept taxpayers entry and continue to process the return. Accept taxpayers entry with parenthesis. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ Edit CCC “C”
    on the return and continue processing. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ The taxpayer has provided a Form 941c or supporting statement, Verify the line 7d amount against the attached Form 941c.
    See IRM 3.11.13.17. for verification procedures for Part II, Income Tax Withholding (Including Backup Withholding) Adjustment
    of Form 941c.
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    Figure 3.11.13-38

    This image has been removed because it contains Official Use Only.
    Please click here for the text description of the image.

    This image has been removed because it contains Official Use Only.

    Figure 3.11.13-39

    This image has been removed because it contains Official Use Only.
    Please click here for the text description of the image.

    This image has been removed because it contains Official Use Only.

  6. Process an Increase in Federal Income Tax Withholding - Accept any increases in Federal Income Tax Withholding whether or not a Form 941c, supporting statement, or explanation is
    attached. If a Form 941c is attached, verify that the correct entry is shown on line 7d of the return. See IRM 3.11.13.17
    for verification procedures for Part II, Income Tax Withholding (including back-up withholding) Adjustment on Form 941c, See
    IRM 3.11.13.17.4 for barred period processing, See IRM 3.11.13.17.5 Form 941c routing to Accounts Management (it is not necessary
    to route Form 941c to Accounts Management with entries in Part II only).

3.11.13.15.9.3 
(01-01-2009)
Line 7e, Prior Quarters Social Security and Medicare Taxes (Rev 2005 through 2008)

  1. Adjustments to Social Security tax may be made on any return, provided the tax period being adjusted is not barred by Statute.
    See IRM 3.11.13.35.

  2. See IRM 3.11.13.18, 94X Adjusted Return Procedures, when:

    • A prior year revision (2008 and prior) filed for a 2009 and subsequent Tax Period showing an amount on Line 7e

    • A 2009 and Subsequent Revision Form 941 with Form 941c attached

    • Form 941 with a Form 941-X or 941-PR X attached

  3. Perfect line 7e as follows:

    IF AND THEN
    The taxpayer has an entry on lines 7e, 7h, and 8, is a decrease, negative or minus amount, Process the adjustment using the procedures in (4) below.
    The taxpayer has an entry on lines 7e, 7h and 8, is an increase amount, Process the adjustment using the procedures in (5) below.
    The taxpayer has an entry on line 7e, meets all of the following conditions:

    • Same amount on lines 2 or 5d and 7e,

    • No explanation or substantiation provided for adjustment,

    • The entry on Line 7e is not included on Line(s) 7h or 8, or Line(s) 7h or 8 are blank,

    		 Consider the entry on line 7e as an incorrect entry and place an Asterisk (*) to the left of the entry. Continue to process
    the return.

    Note:

    If line 7f also contains a decrease, negative or minus amount to adjust tax on Income Tax Withholding wages which is not explained
    or substantiated (i.e. Form 941c is not attached), then also edit CCC “C”
    per IRM 3.11.13.11.2

  4. Process a Decrease in Social Security and Medicare Tax as follows:

    IF AND THEN
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ The taxpayer has NOT provided a Form 941c or supporting statement, or there is no explanation for the adjustment, Accept the taxpayers entry and continue to process the return. Accept the taxpayers entry with parenthesis. ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ .
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ Edit CCC “C”
    on the return and continue to process. ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ .
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ The taxpayer has provided a Form 941c or supporting statement, Verify the line 7e amount against the attached Form 941c.
    See IRM 3.11.13.17 for verification procedures for Part III, Social Security Tax Adjustment and Part IV, Medicare Tax Adjustment
    of Form 941c, See IRM 3.11.13.17.5 Form 941c Routing to Accounts Management.
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

  5. Process a Increase in Social Security and Medicare Tax - Accept any increases in Social Security and Medicare Tax Adjustment whether or not a Form 941c, supporting statement, or
    explanation is attached. If a Form 941c is attached, verify that the correct entry is shown on line 7e of the return. See
    IRM 3.11.13.17 for verification procedures for Part III, Social Security Tax Adjustment and Part IV Medicare Tax Adjustment
    on Form 941c, See IRM 3.11.13.17.4 for barred period processing, See IRM 3.11.13.17.5 Form 941c routing to Accounts Management.

3.11.13.15.9.4 
(01-01-2009)
Line(s) 7f, Special Additions to Federal Income Tax (Domestic Only), and 7g, Special Additions to Social Security and Medicare(Rev. 2005 through 2008)

  1. An amount on line(s) 7f, Special Additions to Federal Income tax, and 7g, Special Additions to Social Security and Medicare
    Tax , represents a correction of income tax (on line 7f) or Social security and Medicare tax (on line 7g) due to a prior Compliance
    (Examination) review assessment.

  2. See IRM 3.11.13.18, 94X Adjusted Return Procedures, when:

    • A prior year revision (2008 and prior) filed for a 2009 and subsequent Tax Period showing an amount on Line 7f or 7g

    • A 2009 and Subsequent Revision Form 941 with Form 941c attached

    • Form 941 with a Form 941-X or 941-PR X attached

  3. If a negative amount appears on Line 7f or 7g, edit as follows:

    IF THEN
    Line 7f has a decrease entry, Step 1 – Asterisk (*) the entry,
    Step 2 – Edit the entry to line 7d.
    Line 7g has a decrease entry, Step 1 – Asterisk (*) the entry,
    Step 2 – Edit the entry to line 7e.

  4. Any amounts entered on line 7f or 7g should be in dollars and cents.

    IF THEN
    There is an entry on line(s) 7f or 7g Determine whether the entry on line 7f or 7g was mathematically included in the amount appearing on line 7h, (or if 7h is
    blank), line 8.
    The entry on line
    7f or 7g was mathematically included
     in an amount appearing on line 7h, (or if 7h is blank), line 8,     		Step 1 – Review the return attachments for a Form 941c, or supporting schedule,
    Step 2 – If a Form 941c is not attached, edit CCC “C”
    and continue to process the return,
    Step 3 – If a Form 941c, or supporting schedule, is attached with an explanation, then accept the adjustment and the amount of the
    adjustment as shown on the Form 941.

    Note:

    Do not attempt to math verify Form 941c for line(s) 7f or 7g entries. Verify only that the amount shown on the Form 941c was
    entered onto the return line 7f or 7g correctly. Sometimes Examination, for example under IRC § 3509, assesses Social Security
    and Medicare taxes on an employer at a different (and usually higher) rate than the Social Security and Medicare rate(s) shown
    on Form 941.

    The entry on line
    7f or 7g was not mathematically included
     in the amount appearing on line 7h, or if 7h is blank, line 8,     		Step 1 – Review the return attachments for a Form 941c, or supporting schedule, for the adjustment on line(s) 7f or/and 7g.
    Step 2 – If a Form 941c is not attached, and line 7h is blank, consider the entry on line 7f and/or 7g to be an erroneous entry.
    Asterisk (*) to the left of the entry (or entries) and continue to process the return.

    Note:

    This will cause the return to fall out to Error Resolution.

    Step 3 – If a Form 941c, or supporting statement, is attached, then continue to process the return.


Next

Law Offices of Darrin T. Mish, PA

100 S. Edison Ave. Suite A, PO Box 3414, Tampa, FL 33606 (813) 229-7100
Made with Semiologic Pro • Colorblock-blue skin by Techie Coach